T O P I C R E V I E W
|
ranger guy
Member # 4899
|
posted
i was planning to run a blower but plans fell through. but i am getting a set of some dope ass cams that should put an extra 45ponies to the wheels and planning to run a 150 wet shot on the car. what all would i need to be fast and safe! i have stock motor with:75mm tb.75mm c&L plenum,K&N intake,mac longtubes,mac prochamber h-pipe,magne flow exhuast,pullies,and 3.73s. i ran a 12.88 at 105 on dragradials and a 13.2 at 107 on street tires. i should be able to crack off some mid 11's with some good tires?what do you guys think.
|
RobertTS
Member # 1022
|
posted
Which mods did you have when you ran the 12.88s??
|
ranger guy
Member # 4899
|
posted
stock motor with:75mm tb.75mm c&L plenum,K&N intake,mac longtubes,mac prochamber h-pipe,magne flow exhuast,pullies,and 3.73s. and i am planning to get some cams and some nitrous
|
bullitt4110
Member # 6586
|
posted
get a fuel pump or Boost a pump (because with that big of a shot it will be taking a lot of fuel out of the rail at once) and a tune for sure. For the nitrous set up you will need a bottle heater, window switch, fuel pressure safety switch, purge, and if you are lazy a remote bottle opener. I like the Nitrous express kit w/ the shark nozzle the best, but others tend to like to the ZEX aswell. Cant go wrong w/ NX though.
|
ranger guy
Member # 4899
|
posted
ball park,what kinda times will the 125 shot cut?
|
TRIXSNK
Member # 2844
|
posted
quote: Originally posted by ranger guy: ball park,what kinda times will the 125 shot cut?
Ask bottled02gt i think he had a similar set-up and went mid to low 11's.
I think his times are in the top 50 list.
|
bullitt4110
Member # 6586
|
posted
If you get traction, you shouold knock off over a second off your previous time. So probally mid 11's.
|