This is topic fuel lines on my 95gt in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013977

---

Posted by luvmy5.0 (Member # 6699) on :
 
i was fucking around under the hood today and noticed where they connect to the fuel rail, theyre not clamped or anything....do i have to let the car sit to depressurize the fuel system so i can slide them off, and install hose clamps? Also could this effect the idle at all when i pull up to a light? As its pretty shitty till i make a complete stop. it surges till i stop completely. I just replaced the fuel filter this weekend.
 

---

Posted by NO MANRZ (Member # 566) on :
 
Ford fuel line connections use special fittings that need a special tool. Rubber fuel lines either use the special connector below or are perminently pressed on.



Ask your parts store for a ford fuel line tool if you need one. Buy the full kit that also does your AC lines. Pep Boys sells them.
 

---

Posted by luvmy5.0 (Member # 6699) on :
 
so if they slide almost all the way off, then thats ok? Well i put clamps on them anyways...just snugged em
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com