This is topic how much is it to change 302 to 347??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013832

---

Posted by 23boy5.0 (Member # 5511) on :
 
I AM LOOKING FOR SOMEBODY TO BORE MY BLOCK FROM A 302 TO 347. I ALREADY KNOW SOMEBODY TO ASSEMBLE IT, AND I CAN PUT IT IN MYSELF. CAN SOMEBODY TELL ME HOW MUCH I WILL BE LOOKIN AT, THANKS
 

---

Posted by CDT (Member # 5004) on :
 
your going to need the block bored, honed, and clearanced. You are also going to need a new crank, rods, pistons plus rings, bearings etc.
 

---

Posted by 23boy5.0 (Member # 5511) on :
 
yea i know that, i just wanna know how much the work to the block cost. i know where to buy the kit, and i know somebody who can assemble it. I just need to know the price for the block work
 

---

Posted by CDT (Member # 5004) on :
 
which kit?
 

---

Posted by Eddie510 (Member # 2354) on :
 
pm stoauto, think he still work at robs auto machine shop in hayward, good work
 

---

Posted by TrickRacer50 (Member # 6345) on :
 
The prices depend on who does the work and where.

It is about $150 to bore the block .030 over and about an hours labor to get the kit clearanced. Then you could spend extra money on having the block plate honed.

It costs about $150-$300 to balance the kit (dampner to clutch). I forgot the cost to deck. Before you deck and and balance the block you have to pay someone to mock up the motor to check for interference problems. Then give the block back to the shop to finish. Not sure the cost to let the shop check this.

In Marin, I paid $1800 for a balancer, pushrods, mill and verify head cc's, check valves, balance, blueprint, bore, plate hone, mag, hot-tank, deck, check line hone, and mockup.

If you call Brian at ADperformance.com he can get you a 347 assembled and shipped to your door for around $2200! Cheap!
 

---

Posted by Luke87GT (Member # 21) on :
 
judging by the way you stated the question, WAY too much
 

---

Posted by 23boy5.0 (Member # 5511) on :
 

quote:

---

Originally posted by Luke87GT:
judging by the way you stated the question, WAY too much

---

quote:

---

Originally posted by 23boy5.0:

quote:

---

Originally posted by Luke87GT:
judging by the way you stated the question, WAY too much

---

what do u mean by the way stated the question?

---

quote:

---

Originally posted by Luke87GT:
judging by the way you stated the question, WAY too much

---

Agreed!
 

---

Posted by 23boy5.0 (Member # 5511) on :
 

quote:

---

Originally posted by 92coupe:

quote:

---

Originally posted by 23boy5.0:

quote:

---

Originally posted by Luke87GT:
judging by the way you stated the question, WAY too much

---

what do u mean by the way stated the question?

---

im going to take a guess and say he means it doesnt sound like you know much about cars or how to work on them.

with that aside, you would need the block to be bored, honed, and i would also recommend getting the block decked. i'd say just machine work your lookin at about 5-700 bucks

Justin

---