Author
|
Topic: Which Intake to run with a Turbo???
|
91Trunkster
¯
Member # 6598
|
posted
I just finally shelled out the 5 grand for a Hellion Turbo Kit, well I've only had this stang for a few weeks, but anyways my mods are so far:
BBK 70mm TB Mystery Cam BBK Off Road H-Pipe 2 Chamber Catback Flowmasters
I was told a new intake manifold will not help very much, I wanted to pick up a GT-40 but they are supposedly discontinued from Summit. BBK didn't recommened I shell out $600+ for theirs as it "wouldn't help much, but wouldn't hurt"
I hate to lose my flowmasters as I know they are going to create backpressure, any muffler recommendations?
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
get some straight through mufflers, turbos are a big fan of backpressure. tfs intakes
i hear good things about the dynomax bullets, from people with turbos. [ March 13, 2006, 10:31 PM: Message edited by: two-gun kid ]
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
91Trunkster
¯
Member # 6598
|
posted
thanks i might have to call summit and check into those bullets, not a big fan of trick flow though
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
CDT
¯
Member # 5004
|
posted
TFS box or sheet metal
-------------------- Custom Dyno Tuning 510.331.0608 Home of Flat Fee Tuning For All Cars, Trucks and SUV's, EFI & Carb, SCT, AFR, Dynatech, STS Turbos, N2O Refills
Posts: 1053 | From: Hayward | Registered: Nov 2004
| :
|
|
92stangLX
¯
Member # 3252
|
posted
So I assume you have a 302 w/ stock heads? If so I would consider upgrading your heads at the same time you do the intake.
If you plan on keeping the stock heads then just get a used Cobra or GT40 intake.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
91Trunkster
¯
Member # 6598
|
posted
yeah i have a bone stock 302 w/ stock heads, i'll have to wait and see the dyno numbers.
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
GrApeS 5 0
¯
Member # 6148
|
posted
TRICK FLOW INTAKE
magnaflow cat-cback
-------------------- I LiKE 2 BuRn Fu-Kn RuBbER UBzeEs I'M HiGHer ThAN a Fu-KN FiRe EsCApE!!!!!
Posts: 130 | From: StAck510 | Registered: Oct 2005
| :
|
|
onesicklx
¯
Member # 285
|
posted
quote: Originally posted by CDT: TFS box or sheet metal
those intakes on a preaty much stock long block is over kill...
Posts: 1955 | From: san jose, CA | Registered: Jun 2001
| :
|
|
CDT
¯
Member # 5004
|
posted
so is a turbo Plus he will have it already when he has to build a motor
-------------------- Custom Dyno Tuning 510.331.0608 Home of Flat Fee Tuning For All Cars, Trucks and SUV's, EFI & Carb, SCT, AFR, Dynatech, STS Turbos, N2O Refills
Posts: 1053 | From: Hayward | Registered: Nov 2004
| :
|
|
onesicklx
¯
Member # 285
|
posted
quote: Originally posted by CDT: so is a turbo Plus he will have it already when he has to build a motor
according to hellion on there site, there kit comes with a 62mm turbo, i dont think thats over kill for a stock motor...but if you already have a motor built then defenetly get the box intake... [ March 17, 2006, 02:38 PM: Message edited by: onesicklx ]
Posts: 1955 | From: san jose, CA | Registered: Jun 2001
| :
|
|
CDT
¯
Member # 5004
|
posted
with 122k miles you are honestly playing with fire.
-------------------- Custom Dyno Tuning 510.331.0608 Home of Flat Fee Tuning For All Cars, Trucks and SUV's, EFI & Carb, SCT, AFR, Dynatech, STS Turbos, N2O Refills
Posts: 1053 | From: Hayward | Registered: Nov 2004
| :
|
|
91Trunkster
¯
Member # 6598
|
posted
i'll just have to wait and see, i'm not scared to spend a little cash, i'll play with the fire, you never know unless you try
-------------------- Yellow94GT never touched anyone's sig or banned anyone, so I'm going to quit spreading that rumor. It's not like I have any proof anyways. All yellow94gt and other mods have done is volunteer their time to help other people buy/sell parts, learn how to make their cars go faster and meet fellow enthusiasts. I'm a hater, but it's hard to hate on these facts. I have saved hunrdeds, maybe thousands of dollars here buying and selling parts over the years alone, but I don't care, this website owes me damnit, and I'll piss on it as much as I want. Us haters gonna hate. Why contribute to something when you can take for free? I act like I'm@Age15 I make friends on the internet that are@Age18 I was picked on in my youth so I became a bully@Age24 My mouth started to run 24/7 on the internet, but my car never at the track@Age26 First pubic hair@Age30 Troll@Age31 My internet friends and I ALL just got the boot for good!@Age31 Yes, you read it right, 31 and just as childish as my fresh out of highschool internet friends@31 Oh yeah, this isn't my website, so no one has to ask for my permission to change my sig. Hell, not like I pay the CAFORDS bill, so why should they need my permission to put what they want on their site? We're all guests here. Maybe some of us should start acting like guests or leave? (510)375-1589
Posts: 1648 | Registered: Mar 2006
| :
|
|
CDT
¯
Member # 5004
|
posted
that's a good attitude, so many people do these types of things, then when it breaks they are shocked and sad. I wouldn't buy an intake unless it was real cheap, or I would buy for the future
-------------------- Custom Dyno Tuning 510.331.0608 Home of Flat Fee Tuning For All Cars, Trucks and SUV's, EFI & Carb, SCT, AFR, Dynatech, STS Turbos, N2O Refills
Posts: 1053 | From: Hayward | Registered: Nov 2004
| :
|
|
aaskia
¯
Member # 5491
|
posted
here is my setup and maybe that will give you a couple of ideas
t04 turbo .61/.96 a/r track heat intake tw heads e303 cam 70mm tb universal blow thru 42lbers dynomax straight through mufflers 3 inch
I am also going to contact 93 pony and see if he can set me up with a good tune.
-------------------- 1990 Mustang Lx 5.0 ex-chp Tfs track heat intake, F303 cam, Afr 165, Full MM suspension, single turbo kit, autopower roll cage.
Posts: 236 | Registered: Mar 2005
| :
|
|
|