Author
|
Topic: which combo will make more power
|
50 Deep
Jockin 03 Cobras
Member # 6216
|
posted
Ok fellas i have 2 seperate set ups that i want to run and im looking to get some input from some of you fellas with more experience and knowledge then i posess. it deals with my fox body 5.0 and my 4.6 cobra. and im wondering which powerplant will produce better results with the list of mods i give. im trying to decide which motor will give me the most power, reliability, and longevity with both being N/A. and of course i want to know that if i were to line both of these cars up side by side on the track and run em which would win. any opinons from those with experience would be greatly appreciated
5.0 -cai -70mm mass air meter -19lbs injectors -pulleys -70mm tb & spacer -edelbrock performer heads, manifold, cam -jba shorty headers -bbk x-pipe with cats -magnaflow catback -3.73 gears -stock bottom end
cobra -bbk cai -87mm pro-m mass air -24# injectors -62mm twin tb -pulleys -jba shorty headers -SLP x-pipe w/cats and catback -3.90 gears (maybe 4.10 not sure yet) -stock 4v head, cams, manifold -sct tune [ March 07, 2006, 07:52 PM: Message edited by: 50 Deep ]
-------------------- Signature Wheel Ford Representative Email: Terrance@Signaturewheel.com Instagram: @Signature_Wheel_Mustang Web: www.SignatureWheel.com
Posts: 6043 | From: sacramento | Registered: Nov 2005
| :
|
|
Luke87GT
Lay'n more stripes than Caltrans
Member # 21
|
posted
They'll both put down around 285-290rwhp imho.
The 5.0 will have a higher peak torque (although it will happen lower at around 3500rpm). The cobra will never make the same peak torque, but it will have the torque curve shifted to the right and result in similar HP.
-------------------- Stangless
Posts: 7802 | From: San Mateo | Registered: Jul 2000
| :
|
|
mustanggt5091
All I need is.....
Member # 444
|
posted
your first option for the fox sounds a lot like quick88lx old setup. He had the performer(6025)and intake, stock cam, 73mm C&L, 19# full exhaust, 3.55, UCA and LCA and went 12's with a 5 speed
-------------------- 88 GT 357w (SOLD):( 06 Limited Edition R6 !!!!!
Posts: 2353 | From: Fairfield / Santa Rosa , Ca | Registered: Sep 2001
| :
|
|
FasterDamnit
Bad Attitude
Member # 442
|
posted
Put better heads on the 5.0 and it will win hands down (+24lber's) ..
IT'S ALL ABOUT THE HEADS!!!!!
AFR165's, Twisted Wedge, or even better AFR165 Comp or Twisted Wedge CNC.
Seriously- why bother with the Edelbrock heads if you plan on buying aluminum aftermarket heads??
Get the best head you can and it will rock. How about 300+rwhp w/ Cobra intake and STOCK cam?
Read all about it--> http://www.fordmuscle.com/archives/2003/06/afrinstall/
-------------------- '92 LX T5 Looked stock, went 11's 11.90 at 115mph.
'65 Mustang 347
www.fordmuscle.com
Livin' in the Carolina Pines
Posts: 2971 | From: NorCal | Registered: Sep 2001
| :
|
|
lxhatch5.0
¯
Member # 6319
|
posted
I definately agree, get a nice set of high flowing heads, above average, and figure your combo from there, you should see some nice increments in your ET's - As long as the parts work together [ March 08, 2006, 06:18 AM: Message edited by: GRIGGYJAMESJIMBO ]
-------------------- *NorCal
Posts: 1556 | Registered: Dec 2005
| :
|
|
|