This is topic Which/where to get the correct MAF? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=012931

---

Posted by The Rick (Member # 327) on :
 
Ok, i know this is my 3rd thread on this but i'm really stuck right now for some reason. I found someone on the corral that has new 42lb injectors for 290$ or so shipped but i can't seem to find the right MAF.

Combo: TFS tw heads, stage 1 cam, track heat intake, vortech strim (stock boost), full exhaust, stock block, accufab tb (65mm i think?)

I believe someone recommend SCT for the maf but i can't seem to find them, not sure if i'm searching for the right thing. Any website that just sells a combo already setup and calibrated with the injectors etc? I honestly don't care if its a few more bucks, i just want to get the damn parts!
 

---

Posted by JohnB (Member # 969) on :
 
Why not hit up JeffS for the SCT meter and a chip cal'd to your setup?
 

---

Posted by CDT (Member # 5004) on :
 
just get a lightning MAF
 

---

Posted by The Rick (Member # 327) on :
 

quote:

---

Originally posted by JohnB:
Why not hit up JeffS for the SCT meter and a chip cal'd to your setup?

---

This is the advice i was looking for actually, i was planning on getting in touch with him on tuning after the install happens, thanks
 

---

Posted by Eagle347 (Member # 6205) on :
 
Damn, you could have got ford racing injectors brand new cheaper than that.
 

---

Posted by The Rick (Member # 327) on :
 

quote:

---

Originally posted by Eagle347:
Damn, you could have got ford racing injectors brand new cheaper than that.

---

I haven't ordered them, where do you see these for less?
 

---

Posted by CDT (Member # 5004) on :
 
we sell them for less, as does summit.
 

---

Posted by Eagle347 (Member # 6205) on :
 
Summit, here is the part number FMS-M-9593-F302
 

---

Posted by The Rick (Member # 327) on :
 
thanks for the info guys

cdt- sorry for being such a noob in all this but on SCT's website i only see two meters, is that all they make?
 

---

Posted by CDT (Member # 5004) on :
 
yes that is all they make, its all they need.. SCT products are ment to be installed by tuners, then tuned. You will need adapters to go from the 4" MAF to whatever size your tubing is now. You will also need a filter adapter.
 

---

Posted by 92stangLX (Member # 3252) on :
 

quote:

---

Originally posted by CDT:
yes that is all they make, its all they need.. SCT products are ment to be installed by tuners, then tuned. You will need adapters to go from the 4" MAF to whatever size your tubing is now. You will also need a filter adapter.

---