T O P I C R E V I E W
|
306notchback510
Member # 6204
|
posted
i need know who makes a 1 inch intake spacer for a edelbrock intake for 5.0's. thanks
|
two-gun kid
Member # 5891
|
posted
tfs
|
306notchback510
Member # 6204
|
posted
do you have web site or a good place to check it out?
|
two-gun kid
Member # 5891
|
posted
here is the spacer for the performer go to summitracing.com part # TFS-51520013 and its $45.95
|
a50sn95
Member # 527
|
posted
Trick Flow Buy them from Summit, since Summit owns Trick Flow....
|
Eddie510
Member # 2354
|
posted
Sorry for butting in but i have an 1 inch spacer on mine so now my stock hood wont fit, what the lowest cowl i can get. i really dont dig cowls. 1.5? 2?
|
306notchback510
Member # 6204
|
posted
thanks i will get it. i needed it to clear the vale covers on my notch.
|
306notchback510
Member # 6204
|
posted
you need to get at least a 2" hood for it
|
a50sn95
Member # 527
|
posted
How about doing one of these:
 or these: 
The scoop not the decal... [ November 16, 2005, 05:51 PM: Message edited by: a50sn95 ]
|
306notchback510
Member # 6204
|
posted
where do you get the scoop?
|
84GT5.0
Member # 5227
|
posted
quote: Originally posted by a50sn95: How about doing one of these:
 or these: 
The scoop not the decal...
thats ghey.....just put a 2 inch cowl and call it a day
|
306notchback510
Member # 6204
|
posted
thats what my buddy did to his. it gives the motor enough room to move. u can look at it on page 2 of the ford pics goes to luke87gt pics, second row too the right it a white vert with lights on.
|