T O P I C R E V I E W
|
BLOWN 4.6
Member # 4789
|
posted
what gears are better for a 96gt supercharged? im thinking of getting 4:10s or are 3:73 better for this application???
|
Jmir018
Member # 1414
|
posted
i would say 373s becuase you are gonna use a blower.. if you stay n/a then 410s.
|
BLOWN 4.6
Member # 4789
|
posted
i heard 4:10 would work?
|
hidnn.o.s.
Member # 1219
|
posted
with your setup go with the 373's for sure [ November 10, 2005, 11:56 PM: Message edited by: hidnn.o.s. ]
|
86- 50
Member # 4723
|
posted
355's i thought was better for supercharged appl.
|
hidnn.o.s.
Member # 1219
|
posted
But his type of car like the high RPM's. If it were a fox I'd suggest 355's.
|
tonster
Member # 6093
|
posted
go with the 3.73's man, that's what i plan on doing.
|
PWR HNGRY 302
Member # 6000
|
posted
Stick with the 3.73's
|
sharkattack
Member # 645
|
posted
I'd say 4.10's
|
castor
Member # 2765
|
posted
355's
|
03SHKER
Member # 1397
|
posted
Blown, I'd say 3.55 or 3.73's
|
bunchmyfunky
Member # 360
|
posted
Best thing to do is use a 1/4 mile calculator to figure it out that way you know exactly what your getting. rpm calculator
|
AJBlackGT
Member # 3936
|
posted
I would go with the 3.73s
|
autumnstang97
Member # 6111
|
posted
i asked this same question a few weeks ago amd i got a lot of replies that said 3:73'were the way to go cuz i plan on supercharging my stang...so i bought FRPP 3:73s for stang...not installed yet....
|
50deep
Member # 5094
|
posted
it depends on what size tire you're gonna use. I've got 3.73 with a 28 in. tire with N20 and go through the traps at 5500 rpm. I'm thinking about going 3.90's. If you're using a 26 in. tire go with 3.73's. [ November 11, 2005, 02:16 PM: Message edited by: 50deep ]
|
BLOWN 4.6
Member # 4789
|
posted
well my car has 18inch 96 saleen wheels
|
droptp50
Member # 5546
|
posted
355's but thats just me
|
NO-CLONE
Member # 4594
|
posted
I have a 96 S281 Saleen with a twin screw blower and I have a hard time not smoking my 285-35-18 with my 3.55 gears
|