|
Author
|
Topic: time for a tranny rebuild?
|
bigjay
¯
Member # 6110
|
posted
 
 
after the car is warmed up the tranny gets really rough ( the cars a 1989 lx coupe, 5.0 ,just bolt-ons) its almost impossible to get it into first gear when stopped, i have to mash it in while still moving or its rediculously hard, same with second sometimes, reverse always grinds. would this be a synchro problem? wheres a good shop to rebuild this thing in the modesto/turlock/oakdale area?, thanks for any input
--------------------
if ford is FOMOco, that means honda is HOMOco
Posts: 132 | From: Escalon, 209 | Registered: Oct 2005
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
synchros are probaby going. also if you get a rebuid done change the clucth cable and quadtrant.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
2coupe
¯
Member # 2991
|
posted
Could be your clutch going out too. That happened to me and it was my clutch. ![[patriot]](graemlins/patriot.gif)
--------------------
87 NX powered coupe
Full suspension and now working on a motor recipe.
Posts: 165 | Registered: Jun 2003
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
check the clutch cable, it may be getting melted and causing it to stretch.
if the routing of it is wrong and its near one of the header tubes it'll really make it stretch
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Apexmotorsports
¯
Member # 5307
|
posted
I believe Alterspeed is in your area. Give them a call and see if they can take care of you. If they can't help you give us a call at the shop and I am sure we can take care of you. We can usually turn around a tranny rebuild pretty quick.
Mike Mak
Apex Motorsports
ApexMotorsports.com
2555 Lafayette Blvd. Suite #122
Santa Clara, CA 95054
Phone: 408/588-0075 Fax: 408/588-0089
Mon-Fri: 9AM-6PM, Sat:by appointment Sun: Closed
Griggs Racing, Maximum Motorsports, Evolution Motosports, SCT, Racelogic, H&R, Ford racing, Kenne Bell, MAC, Bassani, Vortech, Koni, Hawk, AFR, Tokico, Baer Racing, Magnaflow, Flowmaster, Diablosport, $3 Nitrous Refill
Posts: 957 | Registered: Feb 2005
| :
|
|
stangless
¯
Member # 1414
|
posted
Mike, could you give me a quote please. 5th gear is extremely noise when compared to other gears and when i shift from 2nd to 3rd at the track it grinds. the grinding doesn't happen on the street or during normal cruising speed just at the track at high rpms.
Could that be a synchro?
It's a tremec 3550.
thanks again.
--------------------
=(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
bigjay
¯
Member # 6110
|
posted
thanks for the info guys, ill check the clutch cable, the clutch( king cobra) only has 3k on it, it hasnt slipped on me at all. i hate how far down the clutch engages, whats involved in a adjustable intsall? Apex, out of curiosity what would it cost for A). rebuild with a little heavier duty parts or B) new t-5?
[ October 29, 2005, 04:03 PM: Message edited by: bigjay ]
--------------------
if ford is FOMOco, that means honda is HOMOco
Posts: 132 | From: Escalon, 209 | Registered: Oct 2005
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
