Author
|
Topic: trunk problem
|
93cobracoupestang
¯
Member # 5765
|
posted
i took the spoiler off my coupe and was wondering what to do to cover the holes, im thinking bondo, but wanna know what i could do.. lmk please
-------------------- 1993 Lx Coupe.....a couple bolt ons.
2007 Suzuki GSX-R 600
Posts: 398 | From: Riverside | Registered: Jun 2005
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
The proper way would probably to weld a patch on and then smooth it out with bondo and then paint.
Maybe some sort of rubber gromet to fill the hole? (not to sure the size of them)
Just ideas as i'm sure bondo will work.
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
DSGNotch
¯
Member # 5242
|
posted
You will probably need to do what I did when I shaved my antenna; weld in a patch from the bottom, grind down the welds, and finish it like you would any other bodywork. Glazing putty helped a lot on the bodywork of my car, give it a try.
Posts: 224 | From: Healdsburg, CA 95448 | Registered: Jan 2005
| :
|
|
Migs
¯
Member # 5439
|
posted
quote: Originally posted by MidnightNotchback: You will probably need to do what I did when I shaved my antenna; weld in a patch from the bottom, grind down the welds, and finish it like you would any other bodywork. Glazing putty helped a lot on the bodywork of my car, give it a try.
For sure, it came out looking hella clean
-------------------- R.I.P SilverLX! You are missed bro.
Posts: 348 | From: Healdsburg CA | Registered: Mar 2005
| :
|
|
silverLX
¯
Member # 3207
|
posted
How big are the holes? I would just weld the holes up, you dont need a patch. Grind down the welds and put a little filler over them, block sand, prime, paint
-------------------- 88LX hatch 410w 88LX vert gears, exhaust 95GT H/C/I
Posts: 1613 | From: Sonoma County | Registered: Aug 2003
| :
|
|
|