quote:

---

Originally posted by 306Coupe:
carb or Fuel injected?

---

fuel injected, i want 2 atleast pull 400rwhp
 

---

Posted by Mr JoCo (Member # 1549) on :
 
400rwhp? what u need a 351 for then? a 302 can do that all day
 

---

Posted by underconstructionlx (Member # 5514) on :
 

quote:

---

Originally posted by Mr JoCo:
400rwhp? what u need a 351 for then? a 302 can do that all day

---

quote:

---

Originally posted by Jimbo:
To answer your smog question- technically there is no way a 351W swap would be legal unless you got it from a 95 Cobra R. However I dont think the average smog tech could tell the difference between a 5.0 and a 5.8 if you didnt get to crazy with it(ie no exotic intakes, missing smog pump, fancy fuel rails, AFPR etc). Guess thats not exactly in line with 600rwhp. Personally I would throw legal heads and a smog legal blower on the 5.0 motor, get it to hook and have fun it wont be 600rwhp but remember the 351W is about 75lbs heaver than the 302 as well and no need for a "hookup" come smog time is also a bonus. Guess you could also swap an 03-04 cobra motor into you fox, just a thought.

---

thats true but i also have a stock block i can just throw in when its smog time. another thing if i was 2 do that how rwhp would i get out of the set with the 5.0 motor?
 

---

Posted by Jimbo (Member # 1456) on :
 
Well if you dont mind putting the stock setup back in every two years than your only limited by how much you can spend. I'd bet you could probably get 400rwhp out of a smog legal combo. Maybe a pair of the CARB legal AFR's, a CARB legal Vortech, CARB legal intake and even throw in a cam.
 

---

Posted by phildog (Member # 1214) on :
 
Go with the 351, the torque gains are awesome. I ran 13.3@109 with small GT-40X heads, and F cam and a box intake on top of a 9.0-1 comp 351, until it got hurt. For a basic combo, that thing ran hard with those extra cubes. Just imagine what a real racy combo would run! One jab of the throttle and you will forget about all the little 302 pussies.

Put it this way, a lot of guys step up to 351's, how many go back to 302?
 

---

Posted by FasterDamnit (Member # 442) on :
 
I ran 13.3 at 103 w/ a stock 302, gears, slicks, TB/MAF, shorties. 11.90 at 115 w/ H/C/I 120k mile 302- 315rwhp/329rwtq.


The 351 will be a very nice torque gain for daily driving and have obviously more potential than the 302 when built up.

BUT- you have to be ready to deal w/ smog if you go w/ the 351.
 

---

Posted by CDT (Member # 5004) on :
 
to do 600rwhp you will pretty much need some type of power adder, which one do you plan on using? blower, turbo or N2O...
 

---

Posted by street_illegal_stang (Member # 1554) on :
 
351w is fun
but you can go hi 10's with a stock 5.0 short block
and right top end combo
usually twisted wedge 2.02 head,holley systemax
at least a f303 cam and a novi2000 blower
42lbs injectors t rex and 255 intake
4cyl springs less sway bar in the front
some 28x10.5 mt drags.you'll be flying without winds
this is a good setup and is still streetable
cheaper and more easy to find a 5.0 shortblock
outta a 88 t-bird.they never see past 4500rpm and there automatic familycars.virgins waiting to be broken in good luck with the 351
hope i helped
 

---

Posted by JohnB (Member # 969) on :
 
Without a real block, a stock 302 will split in no time with that combo. Lemme guess, you'd throw a 4cyl T-5 behind that too..right?

It's all about $$$$...and how much you wanna spend to go fast. Got deep pockets? There's plenty of routes to go. "Baller on a Budget"? Do a H/C/I on a 351w (roller-based block) and have tons of fun with it.
 

---

Posted by street_illegal_stang (Member # 1554) on :
 
hahaha f n funny
every one has a problem with a budget setup.
guess i'm lucky then.,been driving on the same stock 89 shortblock for 4 years with a simular combo trickflow twisted wedge2.02/1.60
ported gt40 intake f cam paxton sn93 9psi
longtubes stock isuspended w/3:73
running 7.20 @98 on the norm in the 1/8
full weight 88 notch
using the second t5(5.0)ram heavy duty clutch
30lbs injector,bbk fpr,t rex,255 intake,paxton fmu,msd6al, i still have the 5115 nos kit still in the car but use it only when money is invovled
to pay for my next 4cyl t5 johnb.
its only a 75 shot but cools everything nice
car is not tuned so it'll run quicker in a couple weeks
my friend with a 93 xchp coupe runs a stock 5.0 t5 with only long tubes,gt40 intake/paxton sn92 11psi w/ race impellar,fmu ,24 injectors,spec 2 clutch ,pro 5.0,3:73's 28x10 et
runs best of 7.47 @92 mph stock cam/heads w/isky springs.
that about as simple as it gets
..5.0 motors are as cheap as buying a clutch
around 150 on half off day at pickapart complete motor less distubtor outta a mark 7 or lincoin lsc,some cougars
and t birds.

[ May 30, 2005, 02:54 AM: Message edited by: street_illegal_stang ]
 

---

Posted by CDT (Member # 5004) on :
 
A sn92 or sn93 is in no way similar to a Novi 2000, nothing wrong with budget combo's as long as they hold together.
 

---

Posted by JohnB (Member # 969) on :
 
First off, TW's won't work on a stock block with a F cam unless you notch the pistons. SN paxtons aren't even CLOSE to a stock S trim as far as boost goes, I know...I've had both. Novi 2000? A whole other ball game.
There is nothing wrong with a budget setup...we've ALL been there. You want budget? Try a stock bottom end 302, notched pistons for RPM 2.02's. TFS stage 1 cam. Ported Edelbrock intake. 36'ers with a SQ-trim pushing 10psi. Stock supension, 3.55's, full weight (read: working AC and full interior) 93 Cobra. 11.17@127..and with a 35 shot? 11.02 That's budget.
Oh, and what's with your 1/8th mile stuff? You racin' in Alabama or somethin'?
 

---

Posted by Fostang (Member # 3752) on :
 

quote:

---

Originally posted by JohnB:
Oh, and what's with your 1/8th mile stuff? You racin' in Alabama or somethin'?

---

It's cuzz for the remainder of the 1/4 he had to coast it since the valves kissed the pistons and the SN cooked the oil and killed the ceramic ball bearings.
 

---

Posted by SilverLX351 (Member # 3207) on :
 
F cam and TFS heads clear just fine on my friends factory 91 shortblock...he has 1.7's also.
 

---

Posted by underconstructionlx (Member # 5514) on :
 
well my setup so far is 351, 205 afrs heads, victor intake,long tube headers, 150 shot, i dont know about the cam and rockers. i dont know if the world class t-5 would hold or not and wat kind of clutch should i get.
 

---

Posted by JohnB (Member # 969) on :
 
Your friend is very lucky then.

Are you running the 351 as a NA combo, no SC right? Just the Nitrous? A TFS stage 2 or Z cam would be a good match. And no, the T5 won't last long but my vote for a clutch is a RAM.
 

---

Posted by underconstructionlx (Member # 5514) on :
 
iam just goin to stick with just the n20 for now. then wat tranny should i go with? and how much hp should i get out of this setup?
 

---

Posted by street_illegal_stang (Member # 1554) on :
 

quote:

---

Originally posted by SilverLX351:
F cam and TFS heads clear just fine on my friends factory 91 shortblock...he has 1.7's also.

---

same here..maybe you think you tried this setup or heard a story but i have no valvtrain problems what so ever
sn93 blower maybe the cheapest avalible
but can be modified to put out over 12psi.. yes ball bearing,which is easy to rebuild.
the novi2000 pulleys are actually interchangable
with the paxton,a 10 rib yes but works
the paxton is a very very simple bolt on
and can be upgraded to the vr4 head unit
now what, the vr4 will put you in the 10 sec zone.fo sho But there are a few stock 5.0 combos
that do as well.
p600,t trim,
i know you gotta cut pistions with afr 185's
just do your homework.so you can make your dollars stay in you wallet.
the 1/8 mile in california is irwindalespeedway
:rolleyes:very nice track. you can get you best 60ft times here
i love the 1/8 mile
when racing someone equal to you its alot more challenging
its a off the line race and if you miss a pwr shift,bog out,or don't drop kick the clutch
at the right rpm when staging,you will more than likly lose..budget .4cyl t5 won't last long but gives you the i dont givva fuk confidents to start BaNGiNg gear with out letting of the gas
and 1st gear is like a 4:10 ratio.
but if got the cash go for the 351
time your done i'm sure you'11 have a torque monster.
johnb you made like a least 20 people feel "lucky" today with your valve clearance
scare.i drive my stang daily and to the track
every week if your every down in socal
look me up so i can show you whats up.
cdt what are you talking about?
the sn92 is a self contain oil blower
goof balls
 

---

Posted by 89 FAKE SNAKE (Member # 4531) on :
 

quote:

---

Originally posted by street_illegal_stang:

quote:

---

Originally posted by SilverLX351:
F cam and TFS heads clear just fine on my friends factory 91 shortblock...he has 1.7's also.

---

same here..maybe you think you tried this setup or heard a story but i have no valvtrain problems what so ever
sn93 blower maybe the cheapest avalible
but can be modified to put out over 12psi.. yes ball bearing,which is easy to rebuild.
the novi2000 pulleys are actually interchangable
with the paxton,a 10 rib yes but works
the paxton is a very very simple bolt on
and can be upgraded to the vr4 head unit
now what, the vr4 will put you in the 10 sec zone.fo sho But there are a few stock 5.0 combos
that do as well.
p600,t trim,
i know you gotta cut pistions with afr 185's
just do your homework.so you can make your dollars stay in you wallet.
the 1/8 mile in california is irwindalespeedway
:rolleyes:very nice track. you can get you best 60ft times here
i love the 1/8 mile
when racing someone equal to you its alot more challenging
its a off the line race and if you miss a pwr shift,bog out,or don't drop kick the clutch
at the right rpm when staging,you will more than likly lose..budget .4cyl t5 won't last long but gives you the i dont givva fuk confidents to start BaNGiNg gear with out letting of the gas
and 1st gear is like a 4:10 ratio.
but if got the cash go for the 351
time your done i'm sure you'11 have a torque monster.
johnb you made like a least 20 people feel "lucky" today with your valve clearance
scare.i drive my stang daily and to the track
every week if your every down in socal
look me up so i can show you whats up.
cdt what are you talking about?
the sn92 is a self contain oil blower
goof balls

---

you
must
love
the
enter
bar!!!
 

---

Posted by JohnB (Member # 969) on :
 
Not trying to *scare* anyone here CHIEF. You see, the buckets you cobble together and *promise* to folks they'll work...ya, I'm the one who ends up fixing them when they over-rev and that's when pistons and valves get really cozy together.
Oh, and you can show me "what's up" anytime. I know you'd be throughly embarrassed. Keep in mind, times you're quoting barely equate to a 11.90, and that's if you hook. I was running 11.30's with 7 cyls...

If you want to race "equal" cars, try bracket racing...that's just as gay as the 1/8th mile junk.

Back to your question of tranny's...I'd go with at least a 3550, if not a TKO series. If you want to stay consistent, step up to a built auto.
 

---

Posted by street_illegal_stang (Member # 1554) on :
 

quote:

---

Originally posted by JohnB:
Not trying to *scare* anyone here CHIEF. You see, the buckets you cobble together and *promise* to folks they'll work...ya, I'm the one who ends up fixing them when they over-rev and that's when pistons and valves get really cozy together.
Oh, and you can show me "what's up" anytime. I know you'd be throughly embarrassed. Keep in mind, times you're quoting barely equate to a 11.90, and that's if you hook. I was running 11.30's with 7 cyls...

If you want to race "equal" cars, try bracket racing...that's just as gay as the 1/8th mile junk.

Back to your question of tranny's...I'd go with at least a 3550, if not a TKO series. If you want to stay consistent, step up to a built auto.

---

what where you doing running with only seven cyliders?
a mds 6al will solve your overrevving problem if you did'nt know.
you should talk you quote a 11.30 thats a
7.30's in the 1/8. i dont have a cage yet so if i go 7.25 i get the boot.
my friends race car goes 5.80's @128mph irwindale
and californiaspeedway fontana funfunweekend ranna 9.05 @151 but was gay 1/4mile braket racing
come on down johnboy dont be a jerk
i know someone in garden.ca that sells only 93
5.0 mustangs,cobras and xchp 5 spd cars
pricing from 5200-11,000
depending on the car..cleanest mustangs in socal lo miles.you seem to like paying hi dollar for cars and part,these are good hi end mustang
he has a few under cover chp lx's w/factory t5
rare cars,so if your ever down let me show you around.i know another fellow that can fix you engine problems too cheap if interested let me know he's asc certified.
underconstructionlx,if your looking for 450hp go
302 blower route any higher invest in a dart block and get ready to spend.
if only 450hp take that extra money
and get a jerhico tranny

[ May 31, 2005, 10:00 AM: Message edited by: street_illegal_stang ]
 

---

Posted by FasterDamnit (Member # 442) on :
 
This is no longer giving the poster useful advice. Go over to StreetRacing if you want to get into a pissing match.

BTW-

It's spelled Jerrico.
 

---