|
Author
|
Topic: which heads and which cam ?'n
|
gercolla1
¯
Member # 3068
|
posted
 
 
Current set-up
302 stock block
Cobra intake
GT-40 irons
B-303 w/1.7 rockers
I have a trick flow stage 1 cam sitting around.
should I pick up some edelbrocks or afr's to upgrade my engine? Also, should I keep the B-303 cam in there or swap to the trick flow stage 1 with which ever heads? Don't know what to buy or what to use or stick with. ![[burnout]](graemlins/burnout.gif)
--------------------
Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
AFR's would probably make more AVG power then the Edelbrocks...but either will make more then the GT40's.
Keep the B w/1.7's & retard it 4 degrees with the Edelbrocks, & 6 degrees with the AFR's. (trust me. ![[Wink]](wink.gif) )
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
*BlownMach1*- TRMYN8R
¯
Member # 5400
|
posted
i ran the same set up with my hatch but switched to the trick flow street intake and it helped a lot.i would keep your cam,the TFS cam sucks if you dont run the whole TFS package.i beat a lot of cars in my hatch with aluminum heads and 2 of my friends have the gt-40 irons and they in the 12's.AFR heads will get you more but for the $ you can put elsewhere and still have a fast car.
--------------------
88 notch- MM&FF June 2014 feature car
93 cobra #1879
90 hatch "Wifey's"
14 F150
89 mastercraft- wake tower with some sound
Team True Forged!!!
Posts: 3535 | From: sac town | Registered: Feb 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
I would run Trick Flow Twisted Wedge Heads with the TFS stage 1 cam.
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
Hungry Hippo
¯
Member # 537
|
posted
the afr's and what 93pony said will get you 30rwhp or more if your cam is dot to dot right now ![[Smile]](smile.gif)
--------------------
05 S4 Avant(wagon)
09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|
-NORCALCOBRA-
¯
Member # 2383
|
posted
We have a set of canfield and edelbrocks at the shop I like the canfields my self..We did a 327 with ported canfield that made over 550 n/a i belive
--------------------
H.C.I 285 ci. ported 2003 heads heads, Sullivan Intake, stage 3 cams..T-76 single turbo to come...
R.M.I cylinder head fabrication
408 986 8626
Posts: 516 | From: SAN JOSE | Registered: Jan 2003
| :
|
|
-NORCALCOBRA-
¯
Member # 2383
|
posted
http://www.kkpony.com/ go to the new 327 section there is plenty of info there on the heads some differnt cams and the motor build up..
--------------------
H.C.I 285 ci. ported 2003 heads heads, Sullivan Intake, stage 3 cams..T-76 single turbo to come...
R.M.I cylinder head fabrication
408 986 8626
Posts: 516 | From: SAN JOSE | Registered: Jan 2003
| :
|
|
-NORCALCOBRA-
¯
Member # 2383
|
posted
Gt 40 irons 1.84 int./1.54 exh.
Edelbrock Performer cylinder heads flow @ 28 inches 0f h20 This is with a 1.9 int. and 1.60 exh. valve
Lift Int. Exh.
.100 72 57
.200 131 105
.300 185 121
.400 214 156
.500 223 168
.600 226 153
A.F.R 165 with 1.90/1.60
A.F.R 185 2.02int/1.60 exh.
AFR 205 2.08 int/1.60 exh.
Canfield
[ May 14, 2005, 01:22 PM: Message edited by: -NORCALCOBRA- ]
--------------------
H.C.I 285 ci. ported 2003 heads heads, Sullivan Intake, stage 3 cams..T-76 single turbo to come...
R.M.I cylinder head fabrication
408 986 8626
Posts: 516 | From: SAN JOSE | Registered: Jan 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
