T O P I C R E V I E W
|
1992gtdrop
Member # 4502
|
posted
Well my king cobra clutch has started to slip and it's time for a new clutch. I've been thinking about getting a CF DF clutch, but I did a search on the subject some had good/bad things to say about them.
I looking for a clutch that grabs great, minimal pedal effort, no chatter, and will last fairly long. My car is fairly stock except for an O.R. H-pipe and flows and 3.73 are going in soon. I do a fair amount of street driving if that makes any difference. I don't drive my car that hard, but like to occasionaly get on it in 1st and 2nd when I'm feeling frisky. What would you recommend CF or something else?
Thanks Gus [ April 21, 2005, 11:08 AM: Message edited by: 1992gtdrop ]
|
cdog301
Member # 5136
|
posted
Zoom king cobra (kevlar) works great in my coupe!
|
FasterDamnit
Member # 442
|
posted
I recommend it.
Little stiffer than stock, but not by a lot. No chatter, smooth, controllable engagement. Handled my 315rwhp '92 and LOTS of drag racing w/out incident. Hit lo 1.6 60ft's and ran 11.90 at 115.
|
1992gtdrop
Member # 4502
|
posted
I am also thinking of getting an aluminum flywheel can you recommend any good ones. Thanks Gus
|
SilverLX351
Member # 3207
|
posted
I also have one in my LX. I like it a lot.
|
foxstang
Member # 4688
|
posted
i also have a centerforce, i love it, grabs hard and doesnt require that much pedal effort, call centerforce about the flywheel, i think there are only certain ones you can use?? not sure though.. later
|
mustanggt5091
Member # 444
|
posted
I have it in my 88GT behind a windsor
|
Beavis
Member # 5610
|
posted
on my prev stang i had a cf, the mechanic didn't install it right and was crappy as fk, but i was told the clutch was like that...dunno, i personally would go another route..
|
h8louzn
Member # 1075
|
posted
I had one in my 92 gt, lasted for 4 years of beating.Run 13.10@ 109.9 many times on street tires. Will be getting another one shortly!
|
RobertTS
Member # 1022
|
posted
It grabs GREAT, but I do feel it chatters quite a bit for my taste..
|
1992gtdrop
Member # 4502
|
posted
How do you think this clutch would with an aluminum flywheel?
Thanks [ April 24, 2005, 10:08 AM: Message edited by: 1992gtdrop ]
|
BlackDrop50
Member # 1715
|
posted
My DF CF doesn't chatter, pedal pressure is lightest of any 5.0 clutch I've tried. Grabs very good no slippage even with power and drag radials
|