|
Author
|
Topic: 1984 Mustang !?!?
|
SiKS50
¯
Member # 5248
|
posted
 
 
I want to put a kenwood deck in my Mustang. It Has a stock Stereo. Where do I start ? How do i do it ? ![[Confused]](confused.gif)
Posts: 17 | From: East Palo Alto | Registered: Jan 2005
| :
|
|
94gt
¯
Member # 3060
|
posted
basically its pretty easy.
I'm assuming you are running stock speakers too.
Pull out the stock deck, being carful not to mess up your bezel...
Just match up the wiring on the back of the deck and cut the stock harness (or buy an adapter) and match them up l/r front/back.
Grab a mulitmeter, Find an constant 12vdc source, that will be used for the memory on the deck, and then find an switched 12vdc source that will be used to power the deck. switched being only on when the car is in run/start/acc
then swap the antenna over, and you should be done.
--------------------
2020 Explorer ST
2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
h8louzn
¯
Member # 1075
|
posted
It's not all that easy!
He has a 2 knob radio if it has not been replaced yet.
You will have to cut your dash to fit a din type deck.
first you will have to measure the deck and the opening in the dash.
Next take a dremal or something and start cutting.
If the dash is in good shape and not craked you could get a disc player that transmits thru the radio so you don't have to cut the dash.
[ April 17, 2005, 11:40 PM: Message edited by: h8louzn ]
Posts: 593 | From: Sac. | Registered: Mar 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
