|
Author
|
Topic: J.S.R custom intakes 96-98 4v
|
-NORCALCOBRA-
¯
Member # 2383
|
posted
 
 
Well we got our first set of intakes and we are extremely impressed with what we have come up with. First dyno is the first intake we thought we had it real good with this one. But to our surprise we dynoed yesterday with a huge gain from our second prototyped one over our first one. Car is a 100% stock long block with bolt ons. With the first intake car went 11.4 @ 118 N/A car weighs 2950 with the driver. This is the fastest stock long block N/A 4v car to my knowledge. Cant wait to see what it does with the second intake at the track..Pics of the intake on my website links in my sig.
First dyno over stock With 4.88 gears And first proto intake  Second with 4.56 gear and Second proto intake  
[ March 09, 2005, 12:28 PM: Message edited by: -NORCALCOBRA- ]
--------------------
H.C.I 285 ci. ported 2003 heads heads, Sullivan Intake, stage 3 cams..T-76 single turbo to come...
R.M.I cylinder head fabrication
408 986 8626
Posts: 516 | From: SAN JOSE | Registered: Jan 2003
| :
|
|
96Mysticobra
¯
Member # 577
|
posted
Hey, Im looking into getting a motor done by HCI. Do you know roughly what it would cost for a .20 bore w/cp flat top pistons or maybe 5cc dish, manely rods, billet gears, etc. Including all the labor. What kind of warranty is there on HCI motors? Finally, how much is that intake and a dynotune going to run?
Posts: 113 | Registered: Nov 2001
| :
|
|
-NORCALCOBRA-
¯
Member # 2383
|
posted
I may have a motor for you I want the H.C.I guys to build me one of the baddest billet rodded custom piston motors. With crank work and all.Pm me or call me if you are intersted It was built by h.c.i forged flat top motor I also have some ported b heads to go with it...It is still sitting on the stand at h.c.i. As for the intake it will be in the 750 to 1000 dollar range. H.C.I has a one yeat warranty on shortblocks
--------------------
H.C.I 285 ci. ported 2003 heads heads, Sullivan Intake, stage 3 cams..T-76 single turbo to come...
R.M.I cylinder head fabrication
408 986 8626
Posts: 516 | From: SAN JOSE | Registered: Jan 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
