|
Author
|
Topic: no p/s at idle?
|
1FAST89GT
¯
Member # 5071
|
posted
 
 
at idle i have no power steering, when i give it gas i have power steering or when i am driving p/s feels normal? is this a pump or rack problem? pump is full of fluid. problem is on a 89 gt 5.0
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
The Nick
¯
Member # 2244
|
posted
Sounds normal to me. The PS pump runs off the accessory belt. When the motor is running at low RPM, the pump isn't making much power. Kick up the RPMs and it turns fine. It could be that the pump is going out, but my truck and car are both more difficult to turn at idle.
--------------------
Fast, Cheap or Reliable. Pick two and live with it.
Posts: 1215 | From: The Delta | Registered: Dec 2002
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
i don't think so i have no p/s at all i have to muscle it at a stop to turn, if i get into a friends stang it is totally smoother
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
166 Merlo
FELONY
MOTORSPORTS
Member # 1549
|
posted
i only turn with the car rolling ![[Cool]](cool.gif)
--------------------
'89 - Boss Coupe
'70 - Drop Cutthang
'68 - Cougnut
'87 - 0166, Its real
Posts: 3954 | From: Thebay | Registered: Jul 2002
| :
|
|
jaybquick
¯
Member # 4286
|
posted
Most likely the pump or a slipping belt due to a bad tensioner. 25% chance on the rack.
--------------------
91 Mustang GT ET: 11.92@115
66 Mustang ET: 11.43@119
01 Audi S4 ET: 10.8@131
05 Audi S4 ET: 11.9@116
08 Audi S5 ET: 11.9@118
Posts: 416 | From: Lathrop | Registered: Mar 2004
| :
|
|
CDT
¯
Member # 5004
|
posted
flush the system out, if that doesnt help try the pump drill mod. Or change the pump and rack as if one goes bad the other is ususally close behind because of the metal shavings
--------------------
Custom Dyno Tuning
510.331.0608
Home of Flat Fee Tuning For All Cars, Trucks and SUV's, EFI & Carb, SCT, AFR, Dynatech, STS Turbos, N2O Refills
Posts: 1053 | From: Hayward | Registered: Nov 2004
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
ne other ideas?
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
Joooestang66
¯
Member # 2828
|
posted
I'd say you should suspect the p/s pump. If you have no assist at idle but it is ok off idle, the pump is not providing enough pressure at idle. I'd start there. Also, how wide are your wheels? Do you have caster/camber plates installed? A severe incorrect caster setting would cause a poor steering returnability/hard to steer condition.
--------------------
"Don't Drive Faster Than your Guardian Angel Can Fly..... Well My Guardian Angel Can Fly Pretty Fuc*ing Fast!!!"
Posts: 581 | From: Elk Grove | Registered: May 2003
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
car is lowered 17x9 cobra wheel mm cambr/caster plates caster is off, thanx for info
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
88-383
¯
Member # 4088
|
posted
And this is with the stock pullies?
Posts: 23 | From: Tracy | Registered: Feb 2004
| :
|
|
1FAST89GT
¯
Member # 5071
|
posted
no aftermarket pullies
Posts: 4915 | From: VALLEJO | Registered: May 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
