T O P I C R E V I E W
|
fastertoys1
Member # 5270
|
posted
i have my engine on a stand and am having a new cam put in so i figures might as well change all the little things along the way to help. but i dont know what else to change here my set up 93 block gt40 iron heads 1.7 roller r's cobra intakes 24 inj
im thinking of going sage 1 cam or e303 whats better? im thinking new double roller chain,new roller lifter, and pushrodes any ones know what brands r good and if i should change anything else
|
onesicklx
Member # 285
|
posted
you could change the valve springs also...
|
fastertoys1
Member # 5270
|
posted
my heads look like their in good condtion does any one know whick is a good timming chain ? and size push rodes i need thanks ? also what brand ands type roller lifter are good thanks anything else
|
fastertoys1
Member # 5270
|
posted
can anyone help?
|
HungryHippo
Member # 537
|
posted
get the ford racing timing chain and roller lifters. they are the cheapest and best for your application. you can reuse stock pushrods.
|
fastertoys1
Member # 5270
|
posted
i figured i might as well change the push rodes whille it was taking apart but i dont know what size i need?
|
HungryHippo
Member # 537
|
posted
ford racing makes hardened stock replacements. i think its like 6.28"
|
fastertoys1
Member # 5270
|
posted
can anyon conferm that what else can any one suggest?
|
The Nick
Member # 2244
|
posted
You obviously have the internet. You can use it to find the things you are asking.
|
AJBlackGT
Member # 3936
|
posted
Measure your pushrods and order new ones that are the same size if you want to buy new pushrods
|
fastertoys1
Member # 5270
|
posted
quote: Originally posted by The Nick: You obviously have the internet. You can use it to find the things you are asking.
OBVIOUSLY THATS WHAT IM DOING THIS IS THE TECH SECTION ISNT IT ?
|
LXman25thANNV.
Member # 5359
|
posted
I would look into a power package to see what they would use, then buy only what u need. Don't overlook the transmission or rear end either once ur horses get real high or u WILL be sorry!
|
94gt
Member # 3060
|
posted
quote: Originally posted by fastertoys1: quote: Originally posted by The Nick: You obviously have the internet. You can use it to find the things you are asking.
OBVIOUSLY THATS WHAT IM DOING THIS IS THE TECH SECTION ISNT IT ?
I think he was trying to say "google it" and figure it out on your own, instead of using this forum for its intended purpose, which is to get tech help about things you may not know about.
|
HungryHippo
Member # 537
|
posted
if you even tried looking for pushrods, you would see that companies like fms and crane make "stock replacement" hardened pushrods for under $50 so you dont need to know what length they are.
|
94gt
Member # 3060
|
posted
maybe he's just curious on the measurement
|