T O P I C R E V I E W
|
gtmustang916
Member # 3288
|
posted
Ok here we go, my car has an alarm and my power windows just started fuking up, i cant lock my doors with the power button or when i set my alarm, i checked all of the fuses and they are fine any help is greatly appreciated.
|
94gt
Member # 3060
|
posted
id say that your swiches are are prolly dirty. you can either go buy new ones from ford for about $21, or go to a pink n pull and get 5 old ones for like $4. You can also clean them and reuse them, since its usually only grime and grease that builds up on them.
|
cees87drop
Member # 4066
|
posted
make sure you alarm is hooked up right. had the same problem because one of the wires got unhoked. Then my alarm started to act up so i unhoked every thing and my power doors don't work any more. Is your alarm new?
|
gtmustang916
Member # 3288
|
posted
Nope it was on the car when i bought it two years ago its an old school viper alarm. And the alarm is working still but its not locking the doors anymore, and when i press the lock power button the doors dont lock anymore.
|
cees87drop
Member # 4066
|
posted
quote: Originally posted by gtmustang916: Nope it was on the car when i bought it two years ago its an old school viper alarm. And the alarm is working still but its not locking the doors anymore, and when i press the lock power button the doors dont lock anymore.
My alarm was still working except for the power doors then that is when i found the unhooked plug from the alarm. Hooked it back up and it worked again.
|
gtmustang916
Member # 3288
|
posted
well i looked with a flashlight and everything and cant find a loose wire
|