|
Author
|
Topic: Cam question
|
J's90-LX
¯
Member # 2987
|
posted
 
 
I wanted to get some opinions on a cam for my setup.
70,000 mile shortblock
performer intake
24#injectors
edelbrock 6037 heads mildly ported
1.6 rockers
65mm tb
73mm maf
I was thinkin about goin with the XE274HR but i wanted to get some opinions before i purchase it.
[ January 02, 2005, 11:55 AM: Message edited by: J's90-LX ]
--------------------
1999 Lightning
-4lb pulley,LFP intake,tune
Posts: 498 | From: Roseville | Registered: Jun 2003
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Great cam, but you'll probably have piston to valve contact unless you retard it a little bit....& even then it'll be VERY close if it clears.
I like the X303 on a 112ICL (retarded 4 degrees) with your setup.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4266 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
