T O P I C R E V I E W
|
GT_R
Member # 4941
|
posted
Is a 75mm tb too much air for a 2004 GT with BBK cold air Trick Flow plenum off ford x pipe pullys diablo predator programmer 3:73 gears or would my car perform better with a 70mm? [ December 19, 2004, 09:34 PM: Message edited by: GT_R ]
|
Yellow94GT
Member # 431
|
posted
I read in a 5.0 mag a few months back about a 75mm vs 70mm comparison on n/a and boosted setups. In the write up the 75mm made more power n/a than the 70mm. These are the same results as when tested on a 302 based motor.
I say the bigger that better
|
bunchmyfunky
Member # 360
|
posted
I have a 70mm TB I'm going to be upgrading to a Dragon Plenum with a 75mm TB. Lots of people are running 75mm TBs NA. I would check out a few of the other sites that are 4.6 oriented they have some independent write up's on the upper plenums and 75mm TBs with dyno graphs.
|
GT_R
Member # 4941
|
posted
quote: Originally posted by bunchmyfunky: I have a 70mm TB I'm going to be upgrading to a Dragon Plenum with a 75mm TB. Lots of people are running 75mm TBs NA. I would check out a few of the other sites that are 4.6 oriented they have some independent write up's on the upper plenums and 75mm TBs with dyno graphs.
what other websites are there???
|