T O P I C R E V I E W
|
NvrEnough89GT
Member # 5086
|
posted
Im a noob here and this is the first time I took apart my engine on my own car. Im putting some different heads in and I wanted to know if my pistons are still ok and is the caked on greese on there ok. Is this normal. Sorry for being a noob here just checking with ya guys.
|
mtbaughs
Member # 4052
|
posted
They are fine
|
NvrEnough89GT
Member # 5086
|
posted
Thanks Man.
|
NvrEnough89GT
Member # 5086
|
posted
Old heads
|
Mr JoCo
Member # 1549
|
posted
Yea fashow, it's just a little BHG.
|
NvrEnough89GT
Member # 5086
|
posted
BHG ? sorry man Newb here
|
onesicklx
Member # 285
|
posted
im gessing blown head gasket...
|
NvrEnough89GT
Member # 5086
|
posted
I dont think I had a blown head gasket I know I had some anti freeze in there but that was my doing when taking apart. I hope
|
Mr JoCo
Member # 1549
|
posted
quote: Originally posted by onesicklx: im gessing blown head gasket...
yea I felt like sayin BGH for some reason.
|
Quick 88LX
Member # 1950
|
posted
I was gonna say... That much antifreeze in the cylinders and you wouldn't have even been able to drive that shit.
|
ci$ko
Member # 2425
|
posted
what heads are you putting on?
|
NvrEnough89GT
Member # 5086
|
posted
Just stock man On a budget sucks. good learning exsperience though
|
Fostang
Member # 3752
|
posted
fucking joe you didn't disconect the bottom radiator hose huh that way when you popped the heads no antifreeze would go all over your floor.
tisk tisk noobie.
Burning a lil oil now weren't we......
Just a bit of denotation probably to do with that cheap gas.
|
NvrEnough89GT
Member # 5086
|
posted
Hhahah yeah man Im a noob for sure.,.. You guys are supposed to be helping me man Crap man I ran 91 all the time i think my timing is jacked. Hey quick ? for ya can I turn the car over and clean the rest of the pistons or will is crew somthing up? Should I be cleaning the pistons heads up? Or is it not needed. Now I know to disconnect the hose lol. The wife was like WTF anti freeze by my washer and dryer whoops [ December 13, 2004, 09:06 AM: Message edited by: NvrEnough89GT ]
|
Fostang
Member # 3752
|
posted
You can turn the motor over for sure to clean it all up. Not a 100% sure but you didn't even set tdc before pulling it all apart. Anyways once your ready to put the heads back on find tdc and leave it there so when you go back to put in the distriburator it's easier.
clean the tops off if you wish.
Less carbon build up could help it from detonating.
|
NvrEnough89GT
Member # 5086
|
posted
right on Sal Thank you. Hey I havent taken the dist off -Whoooot :)am I still ok?
|
Fostang
Member # 3752
|
posted
Yeah your fine but it's going to be a bitch to reinstall the lower intake with the dizzy in the way.
|