T O P I C R E V I E W
|
WhiteGT306
Member # 5064
|
posted
The car is a 1990 GT 5.0 and we just finished installing a completely stock 5.0 motor out of another 1990 5.0 GT. The car runs fine but the only problem is that when I press the clutch pedal the cars idle goes way down and sometimes shuts off. Also everytime I start the car the idle jumps up to 3500RPM's and eventually it comes back down to 900 RPM's. Not sure if the two problems are related.Thanks
|
GOTULKN
Member # 4933
|
posted
had the same prob with my car..... turned out tp be the nuetral safety switch on my pedal
|
Mr JoCo
Member # 1549
|
posted
u got a good ground?
|
CDT
Member # 5004
|
posted
might want to do the minimum idle procedure
|
Eddie510
Member # 2354
|
posted
quote: Originally posted by Mr JoCo: u got a good ground?
good question joe. hey dude . i had the same problem with my shit when i instaled my motor also. ill start up the car and it idels arond 3k rpm. and then if you put the clutch in it would idle normal. lol. and no one knew what it was. then i sold it and dude found out that i diddnt connect this ground and problem was fixed!so you should check it out dude
|
WhiteGT306
Member # 5064
|
posted
Thanks for the help.
|
Eddie510
Member # 2354
|
posted
so did you fix it?what was it?
|