|
Author
|
Topic: nitrous
|
TURLX50
¯
Member # 3928
|
posted
 
 
hey guys i just picked up a kit by nos and i was wondering what wires go where i got it from some guy at school theres alot of wires and no labels.. if anyone could help that would be great thankx....
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
Hungry Hippo
¯
Member # 537
|
posted
there shouldnt be a lot of wires
--------------------
05 S4 Avant(wagon)
09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|
TURLX50
¯
Member # 3928
|
posted
i think theres 8 or 9 like 3or 4 form the rlay and then like 4 or so in the solenoids
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
|
|
88blackstanggt
¯
Member # 4654
|
posted
bring it over here ill figure it out cause im good with that kind of stuff.
--------------------
2001 lightning all stock
1991 gt all stock
2005 kawasaki zx10r
Posts: 232 | From: Antioch | Registered: Jun 2004
| :
|
|
TURLX50
¯
Member # 3928
|
posted
hey you down ill come buy tommarow around 6 and we can do this
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
TURLX50
¯
Member # 3928
|
posted
also have another question of what kida of spark plugs should i use and what timing i should run i have and ecam if that means anything??? im also running ngk spark plugs now... and 16 degrees of timing
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
slidewayz94
CAFords OG
Member # 3101
|
posted
how big of a shot do you plan to run? Need to know. Your proabbly gonna run plugs that 1-2 steps colder than stock.
Posts: 4251 | From: Sac | Registered: Jul 2003
| :
|
|
TURLX50
¯
Member # 3928
|
posted
around 100 or 125
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
nitrous_bob
CAFords OG
Member # 77
|
posted
stock plugs are fine w/ 100 shot...cool weather go with 10*-12* hot go about 10*
gap your plugs smaller though...maybe about .045"
i'm guessing this is the 5115 dry kit??
off the power selonoid.....
orange to power
blue to nitrous selonoid (2 wired together then 1 to ground, 1 to fp safety switch(optional) then to ground.
green to microswitch to ground.
red to arming switch pin #2
pin #1 arming switch needs a switched 12 volt power (there is 1 in the fuse box unused)
pin #3 arming switch to ground
it sounds more complicated than it is.
you should be able to get a schematic from nos...which is now holley
--------------------
5.0 OG since 1990
Posts: 1402 | From: st clair shores MI | Registered: Nov 2000
| :
|
|
TURLX50
¯
Member # 3928
|
posted
its a wet kit... where is the best place to tap in to the fuel system??
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
TURLX50
¯
Member # 3928
|
posted
ttt
Posts: 304 | From: WALNUT CREEK | Registered: Dec 2003
| :
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
