Author
|
Topic: bad idle
|
rnowacki
¯
Member # 686
|
posted
What's the sensor that usually goes out and causes bad idle? Car is dying every time I come to a stop and "hunts" for 30+ seconds on a cold startup, back and forth between 500 and 1200 RPMs until it finds 850. Warm startups it will just die unless I get on the gas a little.
-------------------- AFR 165 heads, FRPP headers, MM Road & Track Suspension plus Torque-arm, 13" Baer's.
Posts: 52 | From: Discovery Bay, CA | Registered: Dec 2001
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
IAC valve. Bolted directly on the side of your throttle body. Pull it off, clean it out really well with carb or brake cleaner. It's probably full of carbon.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
rnowacki
¯
Member # 686
|
posted
That's right... OK, I'll start there. Thank you.
-------------------- AFR 165 heads, FRPP headers, MM Road & Track Suspension plus Torque-arm, 13" Baer's.
Posts: 52 | From: Discovery Bay, CA | Registered: Dec 2001
| :
|
|
white1990stang
¯
Member # 2307
|
posted
also try checking your tps with a volt meter. it should be at like .98, nothing over 1
-------------------- You must be fast, cause I was haullin ass when I passed you.
Posts: 1308 | From: martinez | Registered: Jan 2003
| :
|
|
six 5.0
¯
Member # 3153
|
posted
Also check for vacume leaks
-------------------- IwishIwasan03COBRA!
Posts: 4425 | From: SAN MATEO | Registered: Aug 2003
| :
|
|
jaybquick
¯
Member # 4286
|
posted
clean the throttle plate too with carb cleaner. As a last resort clean the MAF too. Do you have a K&N filter.
-------------------- 91 Mustang GT ET: 11.92@115 66 Mustang ET: 11.43@119 01 Audi S4 ET: 10.8@131 05 Audi S4 ET: 11.9@116 08 Audi S5 ET: 11.9@118
Posts: 416 | From: Lathrop | Registered: Mar 2004
| :
|
|