1CLeeN5.0
¯
Member # 2124
|
posted
 
 
Well guys I decided to install a lower and upper eldelbrock intake manifold on my fox body. which only took me three days to remove and install but when i put everything back together and tried to start it it ran like shit, i check all my vac lines and there all good, check my tdc and made sure my timing was set to 10 (stock for now) even put some gas in my tank just to make sure that it was not a gas problem. so i have tired everything ![[Confused]](confused.gif) and since i go to work during the day and go to school at night i have no time to really get the problem solved. so any advice on what i should do or even a shop that i could take it to would help.
And could you guys help find somebody by the sn of
blackmagic heard from a ls1 member that he was a excellent mechanic and had a shop in hayward thanks alot ![[worship]](graemlins/worship.gif)
Posts: 67 | From: Hayward, CA | Registered: Nov 2002
| :
|
Email this post to someone!
Printer friendly view of this Ford topic
