T O P I C R E V I E W
|
Platinum Pony
Member # 970
|
posted
just wondering the fastest way to do 4 shocks and spring also installing a dnd bumpsteer kit on my 90 gt anything to make it easier and faster let me know [ October 09, 2004, 02:07 PM: Message edited by: Platinum Pony ]
|
88blackstanggt
Member # 4654
|
posted
when you take the stock springs out dont remove the spindles they will catch the spring as it flys out. for the rear drop the whole rear end by taking the upper and lower control arms off and put in top bolts to shocks then lift the rear until the bottom lines up. make sure the spring is orriented the same way as the stock ones came out.
|
HaulinAssMaro
Member # 541
|
posted
quote: Originally posted by 88blackstanggt: when you take the stock springs out dont remove the spindles they will catch the spring as it flys out. for the rear drop the whole rear end by taking the upper and lower control arms off and put in top bolts to shocks then lift the rear until the bottom lines up. make sure the spring is orriented the same way as the stock ones came out.
you dont need to take the uppers and lowers off the rearend.All you need to do is unbolt the shock(in this case replace it at this time)and lower it down that will give you enought room to remove old spring and replace it with the new ones.
|
88blackstanggt
Member # 4654
|
posted
quote: All you need to do is unbolt the shock(in this case replace it at this time)and lower it down that will give you enought room to remove old spring and replace it with the new ones.
your right my bad ive been swapping out rear ends lately, its on my mind. [ October 09, 2004, 05:07 PM: Message edited by: 88blackstanggt ]
|
Platinum Pony
Member # 970
|
posted
well that slightly helped ha ha what about the bump steer? easy or hard?
|