This is topic speed density > mass air in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009058

---

Posted by 1fast281 (Member # 4670) on :
 
How hard is it to do a mass air conversion on a 87 5.0 HO. What parts do you need, are there any conversion kits with everything included that you can buy?
 

---

Posted by JohnCM (Member # 1076) on :
 
It's pretty straight forwards if you read the instructions, And you can buy kits online from eBay.

That's what I did, But I had E Koster install it. Back in the day
 

---

Posted by MISTA EE (Member # 4594) on :
 
PM SENT
 

---

Posted by MustangNate (Member # 4559) on :
 
I bought the Ford Racing kit. Just install the mass air meter, 1 wire, and new computer. That's it. Took me 5 minutes to do it.
 

---

Posted by carajo (Member # 4426) on :
 
i did my conv. on my 86 with left over parts,took me less than an hour.
all you need is a mass air computer,mass air meter and the wiring.the four wires and connector that go to the mass air meter.
LMK if you need help.
 

---

Posted by The Nick (Member # 2244) on :
 
I did the conversion on my 88 Non-Ca car. PM me if you need specifics. Like someone said, all you need is the wiring harness, computer and meter w/ sample tube. It takes less than an hour.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com