This is topic I need A Rollcage/Bar Help? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=008353
Posted by -SVT- Parker (Member # 4057) on :
 
Want to buy a RollCage for my 98 Cobra and need some help. It has to be NHRA Legal and a weld in. I would also like a 6 point. Anyone know of a good place to get one and how much it may cost installed? The closer to Sacramento the better. Oh and if you have a shop name and number that would be great. Thanks in advance.
 
Posted by 5LVENOM (Member # 2282) on :
 
Bought mine from Crhis Alstons chassis works in Sac.

To go faster then 11s it has to be an 8 pt I believe.

I know Motor Palace in Citrus Heights will install it, call Gordie, the owner.
 
Posted by -SVT- Parker (Member # 4057) on :
 
quote:
Originally posted by 5LVENOM:
Bought mine from Crhis Alstons chassis works in Sac.

To go faster then 11s it has to be an 8 pt I believe.

I know Motor Palace in Citrus Heights will install it, call Gordie, the owner.
Oh Shit then Im gonna need a 8 point. Do you have a number for either place?
 
Posted by mustanggt5091 (Member # 444) on :
 
http://www.cachassisworks.com/

[patriot] [patriot]
 
Posted by forced331 (Member # 1270) on :
 
NHRA rules says 10.00 and slower on hard top car(non convertibles) you only need a 5point with the bar on the drivers side. So a 6 point will be fine. If the roll bar has 6 inch by 6 inch plates, you can bolt them on the the floor chasis, with 4 3/8 bolts on each plate. Maximum motorsports makes a good roll bar. Im installing one this month.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com