T O P I C R E V I E W
|
87mustang
Member # 2496
|
posted
i want 2 get a typoon intake and i was wounder if anyone is runing 1 and if they like it? thx
|
Blowfish
Member # 4043
|
posted
Im running one that I bought used , and like it. I had to do a lot of smoothing of sloppy castings but it seems to work just fine . I noticed more mid range power. Im also using a BBK 70 mm throttle body. I wish I would have got the polished one. Good luck
|
JoeT
Member # 298
|
posted
get the edelbrock rpm instead
|
87mustang
Member # 2496
|
posted
the typhoon is a lot cheeper. and look better. hey blowfish r u runing nos at any chance and if so how r u likeing that because i want 2 go from my trick flow to the typoon and the trick flow with nos runs GOOD.
|
FasterDamnit
Member # 442
|
posted
There have been lots of stories of the poor workmanship on the chinese intakes. Joe's was pretty bad. Mine was a polished version and it was OK- still needed some clean-up of casting lines in the ports. Matched w/ good heads they will make power. Just be prepared for some clean-up work, maybe a lot.
|
87mustang
Member # 2496
|
posted
just sandpaper or what?
|
Blowfish
Member # 4043
|
posted
I used a file and some dremel tools on mine , finished with emery cloth , it took a couple a days before I was happy with it. Sorry I dont run a bottle, Im all throttle. C ya
|
67stang
Member # 549
|
posted
here is how: http://www.fordmuscle.com/archives/2003/12/efiintake/index.shtml
|