This is topic INTERCOOLERS in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007880

---

Posted by lawmans_GT (Member # 3235) on :
 
ANYONE KNOW IF AN AIR TO AIR INTERCOOLER FROM PAXTON WILL FIT A VORTEC SUOERCHARGER (S-TRIM)? I HAVE 2001 GT W/VORTEC SC.
 

---

Posted by F8LPONY (Member # 11) on :
 
If it doesn't you can always go Alky injection for the higher boost levels.
 

---

Posted by the50ho (Member # 73) on :
 
Yes it will. You will have to bend the lines in front of the cooler in order for it to fit properly, and reclock the blower, but it will work perfect.
 

---

Posted by ihatethesesns (Member # 684) on :
 

quote:

---

Originally posted by F8LPONY:
If it doesn't you can always go Alky injection for the higher boost levels.

---

quote:

---

Originally posted by ihatethesesns:
Can you direct me to somewhere that has good alky tech(i.e. threads or articles and such)? I would like to read up on it and learn a little more about it.

---

Sure mate...

Good sites to buy one.

This is my Fav. The owner is hella cool and will custom make your kit.
AlkyControl

SMC

Here is alink to the TurboBuick board. They have a whole forum dedicated to this stuff.
TurboBuick.com- Alky forum
 

---

Posted by 9lbpony (Member # 3510) on :
 
Water/alky injection is good stuff. My brother uses it in his LS1. 10.5:1 compression with 12psi of boost. I'd never even consider that combo without it. Another friend runs it on his blown Cobra - it was worth about 8^ of timing. I think my brother's kit was pieced together for about $250 and has a pressure switch to up the voltage at the pump when it breaks 6psi. So at "boost" it kicks in at 1 level and at 6psi it increases the pressure to move more water/alky. You just have to be aware that it will make a wideband O2 sensor read "wrong".
 

---

Posted by Tryin2GoFast (Member # 3166) on :
 
My Brother can make and install a custom alchy kit for your car or anyones car. He has made a few and runs it on his own car ( blown lt-1). Im sure he can answer any of your question regarding alchy injection.

PM him: 96 ws6
 

---