This is topic my !^%$@:"&*? car keeps cutting off in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007587
Posted by yesIdid (Member # 58) on
:
When I shift to neutral, when my rpms are around 2500-3000, from any gear-mostly 2nd and 4th-my car cuts off. I just replaced the IAC hoping that was the problem-NOPE!!! Also, this poblem isn't throwing any codes .
Any ideas??
Thanks!!!!
Posted by Black94 5.0 (Member # 655) on
:
Do you have gears?...If you have an electronic speedo recalibrator the VSS signal could be to blame...
Posted by yesIdid (Member # 58) on
:
Never thought about that... Yes, I do have gears and a Speedcal (elec. recalibration box).
Soooooo. the Speedcal's to blame right? maybe?
Posted by Black94 5.0 (Member # 655) on
:
It could be a lot of things, but the Speedcal is a good place to start....Check all the connections... ![[patriot]](graemlins/patriot.gif)
Posted by yesIdid (Member # 58) on
:
It's kinda stupid-I must have been in denial-but I noticed this problem after I installed my Accufab plenum/throttle body. So I just probably need a tune, but I don't want to get a tune; it seems like a waste of $ on a n/a car.
If my connections look good, I'll get a tune.
Thanks for the help boss .
Posted by Black94 5.0 (Member # 655) on
:
The problem you're discribing has nothing to do with needing a "tune"...You would be wasting your money...
Any mods that you've done put back to stock and see if that makes a difference...I'm not telling you to leave it that way and loose the hp you gained, but It's just a way to find out what's wrong with your car...
It's called processes of elimination... ![[Wink]](wink.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com