Author
|
Topic: upper and lower intake manifold problems
|
HYPR351
¯
Member # 4221
|
posted
Right now I have a cobra upper and gt 40 lower intake manifold the problem is my lower intake has a stripped thread ive heli coiled it once and it just stripped out again now the hole is too big to re tap. what should I do. seckond I just cracked my upper manifold while tightning it down, its not bad its on the edge so I might be able to get it welded but im not sure. now im wondering if I should fix the upper and lower I have right now or should I buy a better upper and lower intake also what would be a better one to get. Thanks for reading this long post.
-------------------- 1995 SALEEN S-351 #22
Posts: 19 | From: Fremont | Registered: Mar 2004
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
Call your local machine shops and ask how much it would cost to weld up some aluminum and fix your upper and lower...
If it's more than $200, I'd definately get a new intake...
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
50/50
¯
Member # 1724
|
posted
You can buy a thread tapping tool to rethread the stripped thread. You can get it at AutoZone. Just ask for their tapping tool and you can do it yourself like easy.
-------------------- Previously named: VenGeance, 5LiterFever, 50cal.
Drive safely. You wanna drive in it. Not DIE in it.
Posts: 499 | From: Stockton | Registered: Aug 2002
| :
|
|
Hungry Hippo
¯
Member # 537
|
posted
i wouldnt worry about the stripped thread, you should be alright without it. for the upper, just jb weld it or put some sealant on it.
-------------------- 05 S4 Avant(wagon) 09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|
S351-R
CAFords OG
Member # 1605
|
posted
[QUOTE]Originally posted by HYPR351: also what would be a better one to get. Thanks for reading this long post. /QUOTE]
If this is for your S351, Edelbrock makes a 351 lower intake to mate with a Performer upper. Trick Flow also has a 351 lower that mates with an "R" upper. Either one will work fine. At the time Saleen came out with the S351, Ford was the only one that offered a fuel injected 351 intake (for the 351 powered 1st generation Lightning trucks). If you opt for either one of the intakes, hood clearance may be a problem if your car has the stock or Saleen hood on it as both the Trick Flow and Edelbrock sit higher than the Cobra intake. I have the Trick Flow intake on my '95 S351-R and I had to notch the rear of my hood for clearance and my car has the optional carbon fiber Saleen hood on it. [ April 07, 2004, 01:25 AM: Message edited by: saleenfan ]
Posts: 344 | From: Earth | Registered: Jul 2002
| :
|
|
HYFLOHDS
¯
Member # 4198
|
posted
check out this website, i saw something similar at the GOODGUYS SHOW, this thing really works.
http://durafix.com/
-------------------- Hyperflow Motorsport Flow testing & PortingService Authorize Superflow SF-600 Test Garage. friscospeed@gmail.com 415-756-5717 DM only
Posts: 308 | From: san francisco | Registered: Feb 2004
| :
|
|