|
Author
|
Topic: HOW MUCH HORSEPOWER
|
93gt
¯
Member # 2558
|
posted
 
 
HOW MUCH HP WOULD I HAVE WITH THIS SET UP STOCK BLOCK AND TRANNY WITH BBK 1 3/4 LONGTUBES, DR. GAS X-PIPE, 2 CHAMBER FLOWS, AFR 185'S, SUPER SPYDER INTAKE MANIFOLD, BBK FENDERWELL COLDAIR, 75MM ACCUFAB THROTTLE BODY, BBK PULLIES, 75MM MASS AIR,30LB INJECTORS, 4:10 GEARS, 1.6 ROLLER ROCKERS, LIFTERS, NOT SURE WHAT CAM ANY SUGGESTIONS. THANX
Posts: 144 | From: SAN JOSE | Registered: Mar 2003
| :
|
|
66 AC COBRA
Nitrous King
Member # 904
|
posted
ditch the bbk cold air in favor of a afm NA powerpipe
the car will make over 300rwhp if u choose a big enough cam
and a spyder intake with afr 185's on a 302 will be way over kill unless its a track only car
the motor could make power 7500 but wont have any power until 3500, not a good street combo
and if using an auto tranny u will need a huge stall that doesnt help the street driving
--------------------
FFR AC Cobra
72 Vega - WCHRA Extreme 10.5
Posts: 6280 | From: Winters | Registered: Feb 2002
| :
|
|
graylx
¯
Member # 3919
|
posted
Would AFR 165s be a better choice than 185s for that combo if you want a street car?
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
Glenn
¯
Member # 520
|
posted
quote:
Originally posted by graylx:
Would AFR 165s be a better choice than 185s for that combo if you want a street car?
There are several cars on here who dyno over 300RWHP with AFR165's
quote:
Originally posted by 66 AC COBRA:
ditch the bbk cold air in favor of a afm NA powerpipe
the car will make over 300rwhp if u choose a big enough cam
and a spyder intake with afr 185's on a 302 will be way over kill unless its a track only car
the motor could make power 7500 but wont have any power until 3500, not a good street combo
and if using an auto tranny u will need a huge stall that doesnt help the street driving
with a larger cam, you are defenitly going to run into P/V clearance issues. I agree about the intake as well. Try a custom cam, and tell them what you want out of the car. try Ed Curtis at www.flowtechinduction.com he might be able to help, or Comp Cams might even be able to help.
[ April 01, 2004, 08:34 AM: Message edited by: Glenn ]
--------------------
S-Trim,331,H/C/I
"JohnB groupie train"
My Car
DragGuam
Posts: 2009 | From: Stationed on a Pacific Island, Guam | Registered: Oct 2001
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
