T O P I C R E V I E W
|
phat50
Member # 1998
|
posted
my 60ft is 2.4 runing a 14.2 at 102mph spinning thru first and second,would drag radials realy help to get into the 13s?
|
AL STOCK
Member # 1852
|
posted
You can drop it from 2.4 to a 1.8 and run a 13.5-13.6 guranteed
|
phat50
Member # 1998
|
posted
cool,thay realy make that much of a difference i need to get some.
|
FordPny
Member # 510
|
posted
Ya bro but dont botter getting those 17" drag radials thou they cost more.
just get some 15" and mount them on some ten holes. Hell I got a dozen 10 ten holes you can have for like dirt cheap. LOL
|
mtbaughs
Member # 4052
|
posted
Oh ya they help bigtime. I remember my old '89 when I bought an extra set of 10 holes and threw some M&H's on them. My car hooked ten times better. I just changed my rear street tires over to the drag tires at the track. Night and day difference.
|
phat50
Member # 1998
|
posted
i cant use those cause im 5 lug.
|
AL STOCK
Member # 1852
|
posted
BTW - SInce you have GT40s, do you feel alotta difference on them when you first installed them? WHich Intake?
|
FordPny
Member # 510
|
posted
quote: Originally posted by phat50: i cant use those cause im 5 lug.
Fine then get some v6 rims 95 rims.
Trust me its cheaper and probably a little faster to go with 15's just beacuse of more sidewall.
You got my number call me if you have a question.
AL Stock I heard the guy he bought the gt40 heads from was a straight G ![[worship]](graemlins/worship.gif) [ March 20, 2004, 01:27 AM: Message edited by: FordPny ]
|
phat50
Member # 1998
|
posted
yes i felt a nice diference in the gt-40s,i will never run stock heads again,i went from 97mph in the 1/4 mile to 102mph with my rear end hopping all over the place and spinning thru first and second,im running the rpm intake.
|
phat50
Member # 1998
|
posted
yep,the guy i got the heads from is a player/pimp/g/mac daddy.
|
HungryHippo
Member # 537
|
posted
i got some nittos dr's on 16" 5 lug waffle rims for sale. lots of tread, pm me if interested. the general rule is, every .1 you knock off your 60' thats .15-.2 off your 1/4 mile time. you should get 2.0 at the very least. i was pulling 1.9 before my trac lok started going out. you should get a 13.5 no prob. i pulled 13.5@102 in my 3600 lb 94
|
HYPERZ28
Member # 1707
|
posted
quote: Originally posted by FordPny: quote: Originally posted by phat50: i cant use those cause im 5 lug.
Fine then get some v6 rims 95 rims.
Trust me its cheaper and probably a little faster to go with 15's just beacuse of more sidewall.
You got my number call me if you have a question.
AL Stock I heard the guy he bought the gt40 heads from was a straight G
I have a full set of V6 wheels with tires. 100.00
|
Red Vette
Member # 870
|
posted
quote: Originally posted by FordPny: Ya bro but dont botter getting those 17" drag radials thou they cost more.
just get some 15" and mount them on some ten holes. Hell I got a dozen 10 ten holes you can have for like dirt cheap. LOL
Get the 17's. Price differance between the 2 tires is 20 bucks a piece from Summit. For 40 bucks I'd much rather have matching wheels on my ride. Nothing looks worse than a nice Mustang with missmatched wheels.
|
DropTopFox
Member # 1689
|
posted
If no one is going to mention ET streets I will. Get some Eld's and ET streets and rip a 1.6. If you're going to change tires at the track may as well go balls out and not drag radials.
|
slidewayz94
Member # 3101
|
posted
got a set off stock 5 starts from 96-98's taking up room, cheap offers accepted. PM me.
|
twstd50
Member # 1981
|
posted
I have 245/40-18 BFG G-Force Drag Radials and was able to do pull a 1.9 60' and 13.63 1/4 @101 with my 94 convertible w/aode checking in at about 3800lbs including me. The DRs didn't loose traction at all. And that was at 35psi!!!
|
Red Vette
Member # 870
|
posted
quote: Originally posted by DropTopFox: If no one is going to mention ET streets I will. Get some Eld's and ET streets and rip a 1.6. If you're going to change tires at the track may as well go balls out and not drag radials.
There is no way a low 14 high 13 sec Mustang is going to pull a 1.6 60 foot. In addition, the BFG or Mickey Thompson Drag Radial will hook just as good as the E.T. street, especially on a 13 sec car. I do agree that welds would look awsome on his car though!
|
DropTopFox
Member # 1689
|
posted
quote: Originally posted by Red Vette: quote: Originally posted by DropTopFox: If no one is going to mention ET streets I will. Get some Eld's and ET streets and rip a 1.6. If you're going to change tires at the track may as well go balls out and not drag radials.
There is no way a low 14 high 13 sec Mustang is going to pull a 1.6 60 foot. In addition, the BFG or Mickey Thompson Drag Radial will hook just as good as the E.T. street, especially on a 13 sec car. I do agree that welds would look awsome on his car though!
This is asuming he has a t-5 and dumping the clutch from 5 grand as I would with ET streets. No only would the Weld's look cool but save some decent rotational weight
|
Red Vette
Member # 870
|
posted
quote: Originally posted by DropTopFox: quote: Originally posted by Red Vette: quote: Originally posted by DropTopFox: If no one is going to mention ET streets I will. Get some Eld's and ET streets and rip a 1.6. If you're going to change tires at the track may as well go balls out and not drag radials.
There is no way a low 14 high 13 sec Mustang is going to pull a 1.6 60 foot. In addition, the BFG or Mickey Thompson Drag Radial will hook just as good as the E.T. street, especially on a 13 sec car. I do agree that welds would look awsome on his car though!
This is asuming he has a t-5 and dumping the clutch from 5 grand as I would with ET streets. No only would the Weld's look cool but save some decent rotational weight
Yup I agree. He could easily pick up a couple 10ths just with less weight. That's why every mustang I've ever had has always had Welds on it. Little scary in the turns though
|
03GT281
Member # 2944
|
posted
IMO dont get some diff wheels, cuz what if someone pulls next to you on the street and starts acting an ass what are you gonna do say hold on while i go home and swich tires...haha....but if your just a track guy then i think its a great idea for myself im a street guy, so i wouldnt do it i would just get DR's for the tires on your car right now IMO remember
|
2stangs69-91
Member # 1951
|
posted
you can't buy Mickey Thompson Drag radials. they are not for sale yet.
|
Red Vette
Member # 870
|
posted
quote: Originally posted by 2stangs69-91: you can't buy Mickey Thompson Drag radials. they are not for sale yet.
Weird, couple weeks ago I saw Haulinassmaro (Matt)hangin the front tires with a set on the back of his car. If you want 'em, he can get em.
|
HaulnAssMaro
Member # 541
|
posted
quote: Originally posted by Red Vette: quote: Originally posted by 2stangs69-91: you can't buy Mickey Thompson Drag radials. they are not for sale yet.
Weird, couple weeks ago I saw Haulinassmaro (Matt)hangin the front tires with a set on the back of his car. If you want 'em, he can get em.
yeah those tires are by far the best tire yet to date.I am now a firm believer in the whole radial racing gig. [ March 22, 2004, 01:45 AM: Message edited by: HaulnAssMaro ]
|