Author
|
Topic: '95 axle/spindle swap Q:
|
The Nick
¯
Member # 2244
|
posted
Ok, say I swap over all the SN95 5.0L suspension and I wanted to get new shocks/struts. Would I get ones made for an 87-93 or for an SN95? Also, are there any other parts that won't bolt right over? The rear axle has a MM torque arm, lower control arms, and panhard bar. These will fit on a Fox if the whole axle is swapped over, right?
Any other info I need?
-------------------- Fast, Cheap or Reliable. Pick two and live with it.
Posts: 1215 | From: The Delta | Registered: Dec 2002
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
The 87-93 shock/struts are shorter than a 94+ shock/strut...If your car is a 79-93 just install 79-93 shocks/struts....You can install 79-93 shocks/struts on a lowered 94+ car though....
Torque arm and lower control arms should work fine...The Panhard MM lists as a different part# for the 94+ compared to the 79-93, so you'll have to call and find out the differences...I dont see why it shouldn't work though....
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
The Nick
¯
Member # 2244
|
posted
The panhard will work. It says HERE that the part number is the same for both. I'll have to invest in some foxbody shocks/struts then, huh?
-------------------- Fast, Cheap or Reliable. Pick two and live with it.
Posts: 1215 | From: The Delta | Registered: Dec 2002
| :
|
|
BlackNGold
CaliforniaFords.com Moderator
Member # 655
|
posted
Cool,
1979-98 (No longer separate part for 1979-93 and 1994-98
-------------------- -SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
|