T O P I C R E V I E W
|
94Blackout
Member # 2541
|
posted
I have an h-pipe I REALLY need to put on, I'm afraid that the blown cats on the current pipe are gonna @#$& somethin up in the motor. I would do it myself, only I don't have a proper jack or jackstands. I don't wnat to drive far to do this... someone near the South Bay preferred
I've called a couple shops and the hacks wont charge me anything less than an hour to do the work... and on top of that wont do it unless it has cats! [ February 23, 2004, 12:11 PM: Message edited by: 94Blackout ]
|
94Blackout
Member # 2541
|
posted
Oh yeah, you can call me at 510-444-4452, or 408-685-4873. Thanks!
|
4.6 EATIN GM'S
Member # 1633
|
posted
an hour is not bad at all
|
94Blackout
Member # 2541
|
posted
Last time I checked, an hour for a 20-30 minute job MAX is not good.
|
Skinny Boi Racing
Member # 2944
|
posted
most shops have to charge an hour even if it takes less to do the job there are no rates for an half hour job
|
HungryHippo
Member # 537
|
posted
it takes at least an hour to do
|
highofftiresmoke
Member # 2159
|
posted
quote: Originally posted by HungryHippo: it takes at least an hour to do
yup
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by 94Blackout: Last time I checked, an hour for a 20-30 minute job MAX is not good.
shit if it takes only 20 to 30 minutes then do it your self then,thats alot faster then what other people on this board would be able to do it in.
|
98slowhoe I don't have a fast car
Member # 895
|
posted
save yourself the money and put it on yourself. Plus you might learn something in the process.
|
98slowhoe I don't have a fast car
Member # 895
|
posted
save yourself the money and put it on yourself. Plus you might learn something in the process.
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by 98slowhoe I don't have a fast car: save yourself the money and put it on yourself. Plus you might learn something in the process.
yeah what frank said
|
six 5.0
Member # 3153
|
posted
Dude, thier is a shop by my house in San Mateo. They charge $60 and it takes them like 20 to 30 min. You are in and out, its worth it call me for the detalis if you are interested. -Matt
|
94Blackout
Member # 2541
|
posted
OBVIOUSLY SOME OF YOU MISSED THE PART OF THE THREAD THAT SAID I WOULD DO IT MYSELF BUT DONT HAVE A JACK OR JACKSTANDS.
|
98slowhoe I don't have a fast car
Member # 895
|
posted
take the money you were gona spend on paying a shop to do the job and go buy them, they might come in handy later down the road. [ February 23, 2004, 08:52 AM: Message edited by: 98slowhoe I don't have a fast car ]
|
94Blackout
Member # 2541
|
posted
quote: Originally posted by 98slowhoe I don't have a fast car: take the money you were gona spend on paying a shop to do the job and go buy them, they might come in handy later down the road.
Thats a better suggestion.... the jack I have is only good for changing wheels really, however I will worry about that down the road. But for the time being I just want to get this thing put on immediately so I can troubleshoot and tune properly. Yesterday I was just looking for some emergency help, today I have lots more options now that I'm at home in San Jose.
|
Jdub07
Member # 2728
|
posted
$50 at Garanteed Brakes and Mufflers on Fremont Blvd. and Thorton.
|
94Blackout
Member # 2541
|
posted
FUCK! No shops will do it since it doesn't have catalytic converters.
|
shiftylx
Member # 2670
|
posted
quote: Originally posted by 94Blackout: quote: Originally posted by 98slowhoe I don't have a fast car: take the money you were gona spend on paying a shop to do the job and go buy them, they might come in handy later down the road.
Thats a better suggestion.... the jack I have is only good for changing wheels really, however I will worry about that down the road. But for the time being I just want to get this thing put on immediately so I can troubleshoot and tune properly. Yesterday I was just looking for some emergency help, today I have lots more options now that I'm at home in San Jose.
if you have more options/time now, i would go ahead and buy the jack and jackstands, you're definitely gonna need them in the future and there's no time like the present to get them. with a jack and jackstands, you should be able to swap h-pipes in less than 1 hour.
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by 94Blackout: OBVIOUSLY SOME OF YOU MISSED THE PART OF THE THREAD THAT SAID I WOULD DO IT MYSELF BUT DONT HAVE A JACK OR JACKSTANDS.
how in the fuck are u gonna say i missed the part in your post that u said u did not have the right tools for the job. u went into your original post and edited it, and then u come back and say that shit. if u said that orginally i would gave u better info, but now u want to come back into ur post and edit it and tfools that they missed shit.
|
Skinny Boi Racing
Member # 2944
|
posted
CSM will do it but you gotta go in there in-person and ask them they did my o/r X but they charge around 120 and only do that shit on saturdays, dont ask why!...there located in Suisun off railroad ave.
|
94Blackout
Member # 2541
|
posted
quote: Originally posted by 4.6 EATIN GM'S: quote: Originally posted by 94Blackout: OBVIOUSLY SOME OF YOU MISSED THE PART OF THE THREAD THAT SAID I WOULD DO IT MYSELF BUT DONT HAVE A JACK OR JACKSTANDS.
how in the fuck are u gonna say i missed the part in your post that u said u did not have the right tools for the job. u went into your original post and edited it, and then u come back and say that shit. if u said that orginally i would gave u better info, but now u want to come back into ur post and edit it and tfools that they missed shit.
Now I REALLY know you didn't read my first post carefully or all the way through, because I went back and edited the part that said no shop will do it for less than an hour and ADDED that they wont do it without cats either. Don't be all butthurt because the info about me not havin a jack or jackstands has been in there from the very first post.
|
94Blackout
Member # 2541
|
posted
quote: Originally posted by Skinny Boi Racing: CSM will do it but you gotta go in there in-person and ask them they did my o/r X but they charge around 120 and only do that shit on saturdays, dont ask why!...there located in Suisun off railroad ave.
Yeah I only found one shop that said they would do it for 100 without the cats in San Jose.
However, I just swung by this guys house and he said he would do it for $40. Took him 45 minutes, and he said he would have got it done quicker if he didn't have to run to the store to get some hose clamps!
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by 94Blackout: quote: Originally posted by 4.6 EATIN GM'S: quote: Originally posted by 94Blackout: OBVIOUSLY SOME OF YOU MISSED THE PART OF THE THREAD THAT SAID I WOULD DO IT MYSELF BUT DONT HAVE A JACK OR JACKSTANDS.
how in the fuck are u gonna say i missed the part in your post that u said u did not have the right tools for the job. u went into your original post and edited it, and then u come back and say that shit. if u said that orginally i would gave u better info, but now u want to come back into ur post and edit it and tfools that they missed shit.
Now I REALLY know you didn't read my first post carefully or all the way through, because I went back and edited the part that said no shop will do it for less than an hour and ADDED that they wont do it without cats either. Don't be all butthurt because the info about me not havin a jack or jackstands has been in there from the very first post.
i aint butt hurt congrats on finding someone to do it for u,and that cheap. i know what u orignally wrote and another person on this board knows what u wrote but its all good.
|
94Blackout
Member # 2541
|
posted
quote: Originally posted by 4.6 EATIN GM'S: i aint butt hurt congrats on finding someone to do it for u,and that cheap. i know what u orignally wrote and another person on this board knows what u wrote but its all good.
[/QB]
I'm not tryin to argue either... I just know that I typed that because that is all I have been telling folks since I knew I needed to get this pipe on. And that I remember typing the original post and misspelling jackstand. But its no big deal.
|
Skinny Boi Racing
Member # 2944
|
posted
My bad i said CSM did my O/R X-pipe, they didnt they were going to until they said $120 i did it myself....my bad
|