T O P I C R E V I E W
|
hidnn.o.s.
Member # 1219
|
posted
Can AOD's out of SC's be used in Fox Bodies?
|
BlueOvalRacing
Member # 1531
|
posted
yes
|
Fostang
Member # 3752
|
posted
yup crown vics also.
|
zpyro35
Member # 3745
|
posted
most parts on the fox chassis cars are interchangeable. not like you'd want some SO parts on your HO mustang though
the 5.0 SO and HO blocks are exactly the same, so anything that bolts onto one will bolt onto the other.
|
BlueOvalRacing
Member # 1531
|
posted
The AOD from the SC has an "A" servo for the o/d band, which is the largest servo piston/cover that Ford made for any AOD.
|
DropTopFox
Member # 1689
|
posted
yup lots of parts are interchangeable, I have a strut tower brace from a T-bird
|
Shok
Member # 3174
|
posted
Isn't the SC a supercharged V6? does the V6 have the same bolt pattern as the V8 for the bellhousing?
|
DropTopFox
Member # 1689
|
posted
quote: Originally posted by Shok: Isn't the SC a supercharged V6? does the V6 have the same bolt pattern as the V8 for the bellhousing?
You can swap bellhousings
|
Shok
Member # 3174
|
posted
oh ok i thought the tranny was one piece. i'm on my first car with an AOD and i haven't really looked at it.
|
BlueOvalRacing
Member # 1531
|
posted
The bellhousing pattern is the same as a Windsor motor, and no, the bellhousing does not come off the transmission case.
|
DropTopFox
Member # 1689
|
posted
quote: Originally posted by BlueOvalRacing: The bellhousing pattern is the same as a Windsor motor, and no, the bellhousing does not come off the transmission case.
I thought you could buiy blow proof bellhousings for an AOD just like a T5 and Tremecs
|
Fostang
Member # 3752
|
posted
dude your smoking dope ryan
I think you've been hanging around drew too long.
aod's are one piece sob's
|
DropTopFox
Member # 1689
|
posted
quote: Originally posted by Fostang: dude your smoking dope ryan
I think you've been hanging around drew too long.
aod's are one piece sob's
Oh man, once this car is done I'm building a 95 that I'm going to run an AODE in just to proove everyone wrong
|
Fostang
Member # 3752
|
posted
then your going to need to resort to holding it together with ductape.
|
DropTopFox
Member # 1689
|
posted
quote: Originally posted by Fostang: then your going to need to resort to holding it together with ductape.
granted it will need to be rebuilt to withstand the motor I'm going to run it with but it will happen. When I had 4.10's with a shift kitin my 95... Then I totaled it
|