This is topic hey,which plugs to use w/edlbrk 6025's? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006860
Posted by gercolla1 (Member # 3068) on :
 
Tried to email edelbrock but they havent gotten back to me...I bet folks on the board know better anyways. [patriot]
 
Posted by forced331 (Member # 1270) on :
 
Use Autolite 3924 for natual asperated or 3923 for blower or nitrous.
 
Posted by xchpstang (Member # 1206) on :
 
Edelbrock recommends 3926 Autolite. Someone correct me if I'm wrong but 3924 would be two steps colder which would be good for nitrous or blower cars.
 
Posted by hidnn.o.s. (Member # 1219) on :
 
I "think" the 3924's are considered the stock heat range for those heads, BUT MAY BE INCORRECT. Call Edelbrock in the morning and post the result for us to see [patriot]
 
Posted by mtbaughs (Member # 4052) on :
 
I've always used the 24's on a NA motor
 
Posted by ray95 (Member # 752) on :
 
i was told the 24's were 1 heat range colder than stock. i checked about 3 weeks ago. i've always gone 1 range colder for blown cars.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com