T O P I C R E V I E W
|
CustomFastbackCA
Member # 1369
|
posted
Hey guys,
Ok so here's my kit. NX 20923 with Gen-X II upgrade. 10lb bottle, bottle heater, psi guage on bottle, blowdown tube, RPM activated window switch, WOT switch, and remote opener. My heater does work, it heats my bottle to just above 900, I'd say 930 or so, but it is suppossed to heat all the way up to 1050. It does this at night in real cold 39 degree weather and during the day at 55 degree weather. Anyone know what the problem? thanks
|
CustomFastbackCA
Member # 1369
|
posted
Oh yeah and this is on my 95' M3. I post here cause' no one knows shit about nitrous really on M3 sites in general.
|
DropTopFox
Member # 1689
|
posted
there is no problem, It should only heat up to 950, anything above that is not a good thing. I have the same kit as you and my heater heats just up to that point also. 950 psi is perscribed, anything above that is considered dangerous because the N2O becomes unpredictable. If it heats up to 1050, you're asking for trouble
|
CustomFastbackCA
Member # 1369
|
posted
Anyone also know if you are always suppossed to see a white stream and not just hear the nitrous purging? I just went and drove it, used the nitrous and felt the pull, but then I purged a bunch of times and did not see the stream just heard the noise.
|
HungryHippo
Member # 537
|
posted
you should see a stream the label on the bottle needs to be pointing up.
|
DropTopFox
Member # 1689
|
posted
my stream usually depends on the temperature outside. usually the hoter the weather the better
|