|
Author
|
Topic: tire tuck in front?
|
bobbystang
¯
Member # 2747
|
posted
 
 
hey guys i was just wondering, when i got my 00' R rims, on the front they are pushin out a little bit. My buddy says when i get an alignment done they can tuck them in. is that true, or what other solutions do i have to get them tucked in.
--------------------
99 cobra 3569-4040
mods: bunch of little things.
Posts: 83 | From: detroit, michigan | Registered: Apr 2003
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
The wheel off-set on the 00 R wheel is a hefty 6.12" backspacing...They are disigned that way to for better cornering...
The only way I can think of by "tucking the tires" is running a lot of negative camber...Negative camber is when the top of the wheel lean inward compared to the bottom of the wheel....If you run too much neg camber you will wear the inside of your tires out really fast...If you run a moderate amount of neg camber you can increase your cornering, but you have to watch and see how the tire is wearing...
Do you have caster camber plates?...Are they just bad looking to you or are they rubbing?...
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
z pyro
¯
Member # 3745
|
posted
lol, are they as bad as those guys who drive cadillacs on 6" rims set a foot away from the car? ![[Razz]](tongue.gif)
--------------------
'95 Integra LS
'08 Buell XB12R Firebolt
'65 Mustang 289 - soon to be 306
Posts: 1732 | From: Fresno, CA | Registered: Nov 2003
| :
|
|
stangin'
¯
Member # 514
|
posted
i had those '00 R wheels on my '97 for about 1 week before i took them off and sold them. they looked real funny to me in the front. the rear sits fine, but the front is awful. i think its a bad idea for your friend to suggest that "you tucked in the tire." i know how that wheel sticks out and in order to tuck it in, it needs a lot of negative camber in the front. a new set of tire will wear out prematurely real quick. theres nothing you can do about it really.
those wheels were designed for the 99-up stangs and i think the BS for the front doesnt effect them that much, lookwise that is.
[ November 25, 2003, 12:11 AM: Message edited by: stangin' ]
Posts: 2993 | From: Bay Area | Registered: Oct 2001
| :
|
|
bobbystang
¯
Member # 2747
|
posted
Alright, thanks for the opinions it is a 1999 cobra by teh way.
--------------------
99 cobra 3569-4040
mods: bunch of little things.
Posts: 83 | From: detroit, michigan | Registered: Apr 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
