T O P I C R E V I E W
|
BOTTLED.LX
Member # 3267
|
posted
XE282HR any body know if this cam is good for this 351w w/ air gap intake 750 carb longtubes, o/r h pipe roush 200 heads, 1.6 rrockers 150 of n2o
|
66 AC COBRA of CA PERFORMANCE
Member # 904
|
posted
do u have a roller 351 block just makin sure u know that older blocks need special lifters to run hydro roller cams
|
93PONY
Member # 60
|
posted
It's a good cam & will make lots of power on a 351 with a carb.
|
BOTTLED.LX
Member # 3267
|
posted
so if i get this cam im going to need roller lifters?
|
mike g
Member # 2919
|
posted
yes the hr at the end stands for hydraulic roller.
i believe you need something like this CRN-36532-16 (summit p/n#) to run that cam.(this is if its not a roller block) [ November 12, 2003, 11:27 AM: Message edited by: mike g ]
|
BOTTLED.LX
Member # 3267
|
posted
COOL THANKS
|