T O P I C R E V I E W
|
msj484
Member # 1341
|
posted
hello all.
i got my 4.10's today, . a few things.
1) the guy at the shop told me to drive 200 miles before i punch it, or get on the freeway. i have already drivin it 140 miles, can i really see how they work now? i drove all 140 miles on the street, not going over 45 mph, no lie. all i know is i shift sooner, i have not been able to see the difference from these or my stock gears because i have been drivin like a grandma. please let me know.
2) the guy had to put on all new bearings, and he said i will need a new part. i forgot what it is called, it is that other big peice inside of the bell housing, it is the thing that makes both of my wheels turn, lol. one of them is REALLY loose, so he says i need new one, is this correct?
thankx again all.
|
st5150
Member # 51
|
posted
1) If Ford doesn't have any silly rules on new rear ends on their new cars, why do shops? I'll tell you why.... to cover their ass if they install the gears wrong and they make noise or fail.
2) I'm not sure what you're talking about. The spider gears? Clutch packs?
|
msj484
Member # 1341
|
posted
lol.
thankx about question # 1. as far as question # 2, there is a part that is right behind the gears. it has a bunch of different things that turn or spin. and it makes the wheels turn. It peice is pretty big, and it sits right behind the gears. you know what i am talkin about?
|
Black94 5.0
Member # 655
|
posted
Differential?....Ford like to call it "Traction Lok" [ October 18, 2003, 11:57 AM: Message edited by: Black94 5.0 ]
|
sharkattack
Member # 645
|
posted
quote: Originally posted by msj484: hello all.
i got my 4.10's today, . a few things.
1) the guy at the shop told me to drive 200 miles before i punch it, or get on the freeway. i have already drivin it 140 miles, can i really see how they work now? i drove all 140 miles on the street, not going over 45 mph, no lie. all i know is i shift sooner, i have not been able to see the difference from these or my stock gears because i have been drivin like a grandma. please let me know.
2) the guy had to put on all new bearings, and he said i will need a new part. i forgot what it is called, it is that other big peice inside of the bell housing, it is the thing that makes both of my wheels turn, lol. one of them is REALLY loose, so he says i need new one, is this correct?
thankx again all.
Take that thing out right now and beat on it. That will break em in just fine. Take it through 1st gear and shift to 2nd and floor it till red line then do it again for 3rd.
|
msj484
Member # 1341
|
posted
OMG!!!!!!!!!!!!!!!11
these gears are so damn tight, i recommend them to ANYONE who has a stang, even a new 1. i have a 2000 GT. thankx for all your help guys. now i have to find someone to burn my chip. later
|
4.6 EATIN GM'S
Member # 1633
|
posted
i left the shop that did my gears and hit the freeway and beat the shit out of my car then went to the track that night.
when u buy a new car do they tell u u cant rev the car over so many rpm;s or a speed? no so go have fun with the fucker
|
Team SOLO
Member # 722
|
posted
changed from 3.73 to 4.10 gears...drove car onto trailer....drove car off of trailer...lined up...raced and all was good ... fuck the driving miss daisy crap..isn't needed
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by Team SOLO: changed from 3.73 to 4.10 gears...drove car onto trailer....drove car off of trailer...lined up...raced and all was good ... fuck the driving miss daisy crap..isn't needed
|
msj484
Member # 1341
|
posted
hey guys. well i drove my car from the bay area to sacromento yesterday and it was great. i race soo many cars, and alot of people told me the freeway driving would be bad. but it was still fast and 5th gear was now useful. the only problem is that my mph's are off. i need to know where to get a speedo gear or get my chip programed. PLEASE HELP!!!!
thankx again all.
|
sharkattack
Member # 645
|
posted
quote: Originally posted by msj484: hey guys. well i drove my car from the bay area to sacromento yesterday and it was great. i race soo many cars, and alot of people told me the freeway driving would be bad. but it was still fast and 5th gear was now useful. the only problem is that my mph's are off. i need to know where to get a speedo gear or get my chip programed. PLEASE HELP!!!!
thankx again all.
open up an MMFF or 5.0 mag and get yourself a 23 tooth speedo gear. 15 bucks i think. easy to swap out takes about as long to jack up the drivers side of the car.
|
91sleeper
Member # 779
|
posted
quote: Originally posted by 4.6 EATIN GM'S: when u buy a new car do they tell u u cant rev the car over so many rpm;s or a speed?
Apperently you've never purchased a new car.
|
4.6 EATIN GM'S
Member # 1633
|
posted
quote: Originally posted by 91sleeper: quote: Originally posted by 4.6 EATIN GM'S: when u buy a new car do they tell u u cant rev the car over so many rpm;s or a speed?
Apperently you've never purchased a new car.
i have purchased 2 new cars and naver been told.whats the point? its a fuckin myth!everyone i know when they had a motor done or got a brand new car has gotten on it and there hasnt been no probs.
|
bunchmyfunky
Member # 360
|
posted
quote: Originally posted by msj484: hey guys. well i drove my car from the bay area to sacromento yesterday and it was great. i race soo many cars, and alot of people told me the freeway driving would be bad. but it was still fast and 5th gear was now useful. the only problem is that my mph's are off. i need to know where to get a speedo gear or get my chip programed. PLEASE HELP!!!!
thankx again all.
You have a 2000 GT right? No speedo gear for that car. You need a Speed calibrator or a chip. To correct the speedo.
|