T O P I C R E V I E W
|
sac 5.0
Member # 2980
|
posted
just got a smoking deal afr205's with 1.7 stud rockers for 1100 but know i am hoping that they arent going to be to much air flow for my 331 what do you guys think or does anybody have a como like that or know somebody that does
|
5LVENOM
Member # 2282
|
posted
can your motor spin 8k rpm?
|
mustanggt5091
Member # 444
|
posted
I hope you are gonna put some boost in that engine, those are some mighty heads for a 331! Are they new? How did you get them?
|
Primer GR40
Member # 476
|
posted
Just hook up a fogger.
|
HungryHippo
Member # 537
|
posted
those are huge!
|
sac 5.0
Member # 2980
|
posted
no they are used bout 8 months on my budys 351 till it blew then he put them on a 306 and went 11.58 he said the power wasnt till after 3000 rpm and he was shifting at like 7000 7200 rpm and no im not going to run a charger just some n2o to get out of the hole so hopefully it works good and if not i am sure i can sell these and buy some 185's bran new with the money i make we will see how it works out
|
KLR89GT
Member # 3324
|
posted
If you are selling I might be intersted. I have a short block and supercharger with no heads right now....
|
yellow67stang
Member # 903
|
posted
Those heads are not huge at all. If you choose the right cam you will be fine and will make good power!
Eric
|
sac 5.0
Member # 2980
|
posted
i think i am gooing to have ed curtis make me a special grind so it might work out pretty good i think
|
Chosen1
Member # 1906
|
posted
1100 for the pair with rockers thats not fair
|
Jeff S
Member # 371
|
posted
Are they setup for a hydraulic roller or solid?
|
sac 5.0
Member # 2980
|
posted
quote: Originally posted by Jeff S: Are they setup for a hydraulic roller or solid?
for roller
|
87 Saleen
Member # 1549
|
posted
Dude you got ripped off, tell u what, I'll buy them off you for $1100, just so you break even and don't have to worry about being in the whole $1100. Let me know
|
66 AC COBRA of CA PERFORMANCE
Member # 904
|
posted
quote: Originally posted by sac 5.0: quote: Originally posted by Jeff S: Are they setup for a hydraulic roller or solid?
for roller
jeffs meant hydrolic roller or solid roller i have 205's on my 427w that is set up for solid roller and u will be shifting very high, u need to hope u have solid roller springs because hydro springs that can be shifted at 8k, damn
|