This is topic will 325/30/18 fit sn-95 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005605
Posted by sactownstang (Member # 2575) on
:
25.7 tall just worried the tailpipe may be a problem.
Posted by hidnn.o.s. (Member # 1219) on
:
If the tail pipes are the only problem that can easily be taken care of at an exhaust shop. Don't let that stop you. I hope you go with them and they fit because I would love to see a pic of the car from the rear with those tires on!!!
Goodluck
Posted by sactownstang (Member # 2575) on
:
ya they would be on a 10.5" rim would be a squeeze 275/35/18 on the front if i keep the new set I just got.
Posted by QwikStang (Member # 2933) on
:
You should be ok. My 285/35/18's have plenty of room. Good luck. I'd like to see pics when u have it done.
Posted by stangin' (Member # 514) on
:
i have 335/30/18 michelin pilots on my cobra. they rub like a mofo over bumps. on hard turns the fender lip WILL rub/cut into the side of the tire. keep in mind that i am lowered 2" so this doesn't help. i had the fender lips cut, but it still isn't enough to eliminate the rubbing. my opinion is 315s would be perfect, 325s is right on the boarder, and 335s is too much.
for pics, go to the corral and search under stangin'. i posted some pics of it a while back.
sactownstang: btw, are you up for the trade? you never got back to me.
[ October 06, 2003, 08:23 PM: Message edited by: stangin' ]
Posted by sactownstang (Member # 2575) on
:
335/30/18 michelin pilots
the stock viper wheel is cheap!
Like 250 each I found some mmx pilot 325 but I may sell the rims and keep my dunlop 285 just wished they protected the rim.
Fueled by Ford Mustang Owners
on CaliforniaFords.com