T O P I C R E V I E W
|
GOT 50
Member # 1960
|
posted
Well i have a hci combo and i only put down 277 hp and 301 tq. This seems off to me.. Is my crane 2031 cam holding me back. Its a blower cam? Blower might take longer then expected..
Thanks for any info.
|
98slowhoe
Member # 895
|
posted
whats the rest of the combo? I have seen blower engines with really low HP before when ran N/A, maybe the blower needs to come sooner????? [ October 02, 2003, 03:47 PM: Message edited by: 98slowhoe ]
|
93PONY
Member # 60
|
posted
If you want another 15hp out of it, retard the cam. If you want 20-25hp out of it install a B303 retarded just a bit.
|
cegan
Member # 3185
|
posted
I believe the 2031 and B303 are a single pattern cam if you what more performace I would use a split pattern cam, somthing like a CompCam 230/240 565/575 or 224/232 555/565 lift @ 112
|
GOT 50
Member # 1960
|
posted
2031 is a split a pattern 512 intake 528 exhaust.
|
GOT 50
Member # 1960
|
posted
How could a B cam alone pick me up 25hp. Or is this a cam thing i will never understand? Tahnks for the info.
|
HungryHippo
Member # 537
|
posted
the 2031 is very mild. i passed smog just as clean as stock with it
|
93PONY
Member # 60
|
posted
When set on the correct ICL in the proper application the B is a very nice mild cam. I believe a local 'legend' ran 112MPH N/A with the B, GT40 aluminum heads, Edelbrock RPM intake, off-road exhaust & a fairly light Foxbody.
There's a lot to be had in the right bumpstick.
|