|
Author
|
Topic: Its time to put the power to the ground?
|
Blownhatch
¯
Member # 167
|
posted
 
 
5.0 8.8 rearend
Im looking to either upgrade on the 8.8 rear end or buy a 9inch with locker ready to go. Will a 8.8 with after market axles handle 5000rpms.
Posts: 427 | From: Protected Witness | Registered: Feb 2001
| :
|
|
93LX342
¯
Member # 1793
|
posted
you could make 800+rwhp and a 8.8 will take it
--------------------
06 f250 superduty with some mods.
95 f250
www.unlimitedracing.com
Posts: 1036 | From: san jose | Registered: Sep 2002
| :
|
|
93LX342
¯
Member # 1793
|
posted
it would cost aound $1200.00 to get the 8.8 built with 9 inch housing ends(c clip eliminators tend to leak),axles(31 spline),and auburn pro or similar differencial.
--------------------
06 f250 superduty with some mods.
95 f250
www.unlimitedracing.com
Posts: 1036 | From: san jose | Registered: Sep 2002
| :
|
|
turbo302
¯
Member # 2786
|
posted
I'am puting down over 700ftlb with my 8.8 31 splines,locker,welded axle tubes motorsport gears.You do not need a 9inch take a look at my site for more info.
--------------------
turbo302
10.20/133
Big Boy Racing Fabrication
www.bigboyracing.com
Posts: 83 | From: bay area | Registered: May 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
