T O P I C R E V I E W
|
Jerm95gt
Member # 1239
|
posted
Now that i got the crane2031 and heads in my car won't idle. My buddy tweeked an idle screw and it worked for like a day and then it won't idle again.......i pulled my chip out after trying a bunch of shit and now it sometimes idles at like 700....but still dies a hole bunch. Could my preburnt jetchip even affect idle?? any ideas?
|
MoostangGT
Member # 2894
|
posted
Have you checked for vacuum leaks?
|
Jerm95gt
Member # 1239
|
posted
yea its not a vaccum leak
|
MoostangGT
Member # 2894
|
posted
Ok well.. when you took your chip out, did you reset the computer?
|
Jerm95gt
Member # 1239
|
posted
yea
|
Bill/APEX Motorsports
Member # 636
|
posted
'94-'95s are pretty finicky when it comes to idling after a cam is installed. We usually switch to a pre-'94 Idle Air Bypass valve, which most often cures air-related idle issues.
|
Jerm95gt
Member # 1239
|
posted
how much will u charge to do that on my car
|
mike g
Member # 2919
|
posted
i'm pretty sure its only 2 bolts and a gasket and obviously the new IAB, but i dont know much about the sn95 stangs it could require some sort of mod to make it work.
|
281n/a
Member # 1465
|
posted
jeremy did you check codes on it?
|
Jerm95gt
Member # 1239
|
posted
yea no problem there.......
|