T O P I C R E V I E W
|
91sleeper
Member # 779
|
posted
What 3 core aluminum radiator should I buy for my 91 mustang and where should I buy it from.
|
Lightning Larry
Member # 2737
|
posted
BECOOL makes great aluminum radiators. Summit has them.
|
91sleeper
Member # 779
|
posted
quote: Originally posted by Lightning Larry: BECOOL makes great aluminum radiators. Summit has them.
$500 plus shipping
|
FasterDamnit
Member # 442
|
posted
http://www.fordmuscle.com/archives/2001/10/radiator/
|
Bill/APEX Motorsports
Member # 636
|
posted
I carry Fluidyne aluminum radiators for our street and racing customers. Only $359 for your '91! And don't forget a new radiator cap and Royal Purple Super Coolant additive! Call, email (bill@apexmotorsports.com), or PM me if you have any questions!
|
91sleeper
Member # 779
|
posted
I am looking in Jegs right now and they have a GMS aluminum radiator that says it's " 3" thick and large 1" cores with 28" wide radiator has double row design". It's $299.99 plus shipping. Does this seam like a good deal?
|
rokcrln
Member # 2536
|
posted
'79-'93 Mustang 5.0L Radiators Radiator # Cores Part # Material CORE THICKNESS Approx Cost* Stock 2 ------ Cu/Br 1.5" N/A Modine 3 1R2305 Cu/Br 1.5" $200 (carparts.com) Modine 2 1R556 Cu/Br 1.5" $130 (carparts.com) Go-Dan 3 433138 Cu/Br 2" $129(Autozone/radiator.com) Go-Dan 2 433556 Cu/Br 1.5"? (not confirmed) $99 (Autozone/radiator.com) *At time of publishing. Costs vary per region.
I would go with the autozone and a better than stock clutch fan to insure air flow. And read the post fasterdamit put up it has a lot of info on alum/brass radiators!!
|
91sleeper
Member # 779
|
posted
quote: Originally posted by rokcrln: '79-'93 Mustang 5.0L Radiators Radiator # Cores Part # Material CORE THICKNESS Approx Cost* Stock 2 ------ Cu/Br 1.5" N/A Modine 3 1R2305 Cu/Br 1.5" $200 (carparts.com) Modine 2 1R556 Cu/Br 1.5" $130 (carparts.com) Go-Dan 3 433138 Cu/Br 2" $129(Autozone/radiator.com) Go-Dan 2 433556 Cu/Br 1.5"? (not confirmed) $99 (Autozone/radiator.com) *At time of publishing. Costs vary per region.
I would go with the autozone and a better than stock clutch fan to insure air flow. And read the post fasterdamit put up it has a lot of info on alum/brass radiators!!
I have that article many times, I currently have a flex-a-lite fan and soon will be going electric as soon as I do a 3g upgrade.
|
Blown Mystic with a POS 90 ranger
Member # 476
|
posted
1800radiator has killer prices.
|
93lx342
Member # 1793
|
posted
ron davis aluminium radiators are i think $240-300 and work awesome.i think all aluminum radiators are 2 1 inch cores.
|
93lx342
Member # 1793
|
posted
the ron davis radiator is $259.00 at www.thefordsource.com
|
rokcrln
Member # 2536
|
posted
When you go electric check out the 97ish firebird/camoro fans. You will never run hot again!
|
The Rick
Member # 327
|
posted
I recently put in the go-dan that they claim is 129$. I might have been in a hurry but I picked it up at pepboys for 190$ (how old is that article??) Anyways, it works great. It was semi wide but it went in easy and seems to fit pretty good. The car stays really cool now and won't go above A in NORMAL with N being very hot. No matter how long I beat on it or sit in stop n go it hasn't yet made it to M
However, I did have to slightly modify (read used a hammer) the radiator brackets because of its width. Also, I have a lame leak at the lower hose because I haven't managed to modify the "fin" (if you have one, you'll know what I mean) and the hose can only get 99% on
I would buy it again in a heartbeat.
|
PurpleNotch
Member # 2902
|
posted
I went with the Griffen nascar stlye. It is a two row with 1" diameter tubing. It's 31"x19" and only cost about 190$ threw summit. I am also running dual 12" electric fans on it and the temp. barely goes over 170 even last weekend at goodguys car show.It's a great combo.
|
hidnn.o.s.
Member # 1219
|
posted
Avoid the Pep 3 core if you are planning on making considerable power at any time in the future. Do it once and go with the aluminum. Which one is up to you.
|
91sleeper
Member # 779
|
posted
quote: Originally posted by PurpleNotch: I went with the Griffen nascar stlye. It is a two row with 1" diameter tubing. It's 31"x19" and only cost about 190$ threw summit. I am also running dual 12" electric fans on it and the temp. barely goes over 170 even last weekend at goodguys car show.It's a great combo.
Thanks
|