This is topic NX Soleniod Question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004236

---

Posted by Yellow94GT (Member # 431) on :
 
Any reason why the N2O soleniod should be open when there is absolutely no power to it?
 

---

Posted by FasterDamnit (Member # 442) on :
 
Ummm, no?
Sounds like it is stuck. Can you disassemble it?
 

---

Posted by Yellow94GT (Member # 431) on :
 
I'm not sure if I should take it apart. It is brand new and hasn't even been used. But today when I hooked up the bottle and opened it to check the system for leaks, solenoid is wide open allowing the N2O to go right through to the injection tip
 

---

Posted by 91sleeper (Member # 779) on :
 
I wouldn't dissasemble it if it's brand new. Send it back!
 

---

Posted by FasterDamnit (Member # 442) on :
 
Well,
It only has a coil, spring and shaft prolly held together w/ a c-clip. But it sounds like it is an out-of-box faillure to me.
 

---

Posted by Yellow94GT (Member # 431) on :
 
I very much dislaike parts that come pre-broken
 

---

Posted by customN2O (Member # 914) on :
 
Its not broken. Make sure the nitrous line is connected to the side port marked N2O, then the purge solenoid is connected to the 1/8 inch port marked with a P, and then the line to the nozzle connects to the 1/8 inch port on the BOTTOM of the solenoid. Try that, then call me if it still doesnt work.
925-998-1517
 

---

Posted by 98StangPower (Member # 518) on :
 

quote:

---

Originally posted by customN2O:
Its not broken. Make sure the nitrous line is connected to the side port marked N2O, then the purge solenoid is connected to the 1/8 inch port marked with a P, and then the line to the nozzle connects to the 1/8 inch port on the BOTTOM of the solenoid. Try that, then call me if it still doesnt work.
925-998-1517

---

Yep thats what it be! Trying to get these pieces off are a biotch, glad to see the loc-tite stuff works well
 

---