T O P I C R E V I E W
|
Night Ryder
Member # 912
|
posted
Does anybody know where I can find a 5-point roll cage for my 96 vert?I tried summit and they don't have it.
|
Blown Mystic
Member # 476
|
posted
5 point Also its a roll bar, if it were a cage you would be enclosed in it. I think you want a 4 point with the crossbrace- http://www.maximummotorsports.com/autopower.asp
|
Night Ryder
Member # 912
|
posted
quote: Originally posted by Blown Mystic: 5 point Also its a roll bar, if it were a cage you would be enclosed in it. I think you want a 4 point with the crossbrace- http://www.maximummotorsports.com/autopower.asp
Oops my bad.Thanks
|
Jeff S
Member # 371
|
posted
What is the reason you want a roll-bar? If it's to be legal for the track the 4 point will do nothing for you.
|
DementedGT
Member # 1463
|
posted
|
GR40Coupe
Member # 698
|
posted
Look in any mustang & fast ford mag, 5.0 mag and there are always companys that have them.
|
Night Ryder
Member # 912
|
posted
quote: Originally posted by Jeff S: What is the reason you want a roll-bar? If it's to be legal for the track the 4 point will do nothing for you.
When I went to the track recently the told me I need a 5-point roll bar.
|
John91coupe
Member # 18
|
posted
Actually, a 5 point is NHRA legal as shown in DementedGT's picture though nobody does just the driver's side doorbar. Most companies sell 6 point rollbars (doorbars both sides) but if you just want to install one side you are OK from a legal standpoint.
|
turbo302
Member # 2786
|
posted
It sounds like you would be better off going with a 6 point with pull-out door bars, that way when you're driving on the street you can take the door bars out (that's what I have in my Mustang). I would try Maximum Motorsports for that application (whatever you do, make sure you get the bar welded in & bolted in) If you can't find the application you're looking for, I can build you a roll bar (or install one you purchase). - turbo302 Sheldon Big Boy Racing Fabrication
|
Night Ryder
Member # 912
|
posted
Thanks for the replies I appreciate it.
|
DropTopFox
Member # 1689
|
posted
Check out Maier Racing, they make custom roll bars to fit every car to the driver's needs
|
1990GT50
Member # 2119
|
posted
Go to Chris Alston's Chassisworks in Sacramento they have one for you. www.cachassisworks.com
|